Trans-Sense Quick pre-check of IEC 61000-4-4 EFT
The Trans Sense has been developed with EMC test laboratories in mind to enable a “go/no-go” verification of the transient generator output prior to the test.
PARTNER:
MARKETS:
TEST STANDARDS:
Manual
Data Sheet
SPECIFICATIONS
Trans-Sense (EN 61000-4-4)
The Trans Sense has been developed with EMC test laboratories in mind to enable a “go / no-go” verification of the transient generator output prior to test. The Trans Sense produces an arbitrary relative amplitude measurement that is dependent upon the applied transient level when measuring 15 / 300 ms bursts. This gives a very quick repeatable check prior to testing and enables simple trend analysis data to be captured.
OTHER PRODUCTS IN THE SAME CATEGORY:
PCD-1000-4 - 4 kV Gigabit Ethernet and PoE Surge CDN
DEC 7 - 6.6 kV Decoupling Network for Asymmetrical Lines
DEC 6 - 6.6 kV Decoupling Network for Symmetrical Lines
DEC 5 - 6.6 kV Decoupling Network for Symmetrical Lines
PCD 126A - 6.6 kV Surge and Ring-Wave Coupling Network
PCD 121 - 6.6 kV Surge Coupling Network for Symmetrical Lines
FP-COMB 63 / 125 / 200 A - 690 V AC Coupling / Decoupling Networks
FP-COMB 63 / 125 / 200 A - 1500 V DC Coupling / Decoupling Networks
FP-COMB 63 / 125 / 200 A - 690 V AC + 1500 V DC Test Networks
CAR CDN 2012 EFT/Burst Capacitive Coupling Clamp ISO
ESD-Static Dissipation Brush, referenced in EN 61000-4-2
ESD Test Table Kit
CAR Cal Kit, Standard loads for Automotive Testing
EMC EPS 70x150cm Support- EUT support
EMC EPS Pad- 5x50x50 cm, EUT support
EMC EPS Block - 10 x 10 x 5 cm, EUT support
EMC PLA Block Lab kits, 10 x 10 x 5 cm
Absolute EMC Monopole Antenna Stand
EMC EPS Cube- 10x10x10 cm, EUT support
