EMC SHAC-200, 700 MHz - 20 GHz, Fully Anechoic Chamber
Description Model EMC SHAC-200 is a compact, fully anechoic RF enclosure for making Over the- Air performance measurements. The EMC SHAC 200 is built on a moveable cart trolley, it fits into parent buildings without any restriction. This Over-the–Air system for wireless, mobile handset device measurements may be used for prototyping, pre-certification testing, performance measurements, and production sampling with a good correlation to measurements made in a larger, fully compliant chamber.
Key Features
- Engineered and completely manufactured both in Italy and Brazil.
- Ruggedized fully hot galvanized steel construction (INOX steel optional)
- Unique compact design.
- Optimized for EMI and EMC.
- Strong fields achieved with low input power
- Broadband up to 40Ghz.
- High effective shielding
- 2 poles 230Vac 50Hz 10A EMI standard line filter
- Excellent quality at a Low cost
The EMC SHAC-200 is an ideal solution when space is a limitation, it can be used for pre-compliance electromagnetic compatibility measurements, as well as biomedical applications. The electromagnetic field distribution inside the chamber is Planar Vertical or Horizontal polarized wave mode. Assuming the field distribution is ideal below the cut-off frequency of the cell (before the introduction of higher order modes), the electromagnetic field distribution can be considered static.
Applications
- Efficient Over-the-Air Antenna Pattern Measurements
- 2D-3D antenna Patterns
- Total radiated Power (TRP)
- Effective Isotropic Radiated Power (EIRP)
- Total Isotropic sensitivity (TIS)
- Effective Isotropic Sensitivity (EIS)
- Test ambient for Microwave in the frequency range 700MHz-40GHz
- Radiation and susceptibility test
- Biomedical and dosimetric applications
- Isotropic sensors calibration
- Receiver sensitivity test
- Shielding effectiveness characterization test
Specifications
Antenna frequency range |
700MHz-40GHz, #Antennas not included: on demand |
Antenna RF Input |
max continuous. input power: 500W RF continuous up to 1GHz, 200W up to 18GHz; Peak 1,5Kw. |
Polarization |
Vertical / Horizontal switchable |
Input connector type |
"N" precision UG-21 |
Shielding |
better than 90dB |
Absorbers |
110 or 300mm anechoic pyramidal carbon foam |
Outer cell dimension |
(L)222x(W)110x(H)110 cm (+H 70cm trolley) |
Weight |
About 500 Kgs. |
Door Size clearance |
90 x 90cm |
Construction |
Fully Hot galvanized steel 2mm, Door: Inox Steel |
Technical panel * |
Power supply / Filter box - In and out. * |
N.2 Feed-thru "SMA/SMA" connectors |
N.1 16 amp. 450VAC, three phase +Ground line filter |
N.1 Feed-thru “N-N” connector |
N.1 Ground connection screw |
N.1 feed-thru fibre optic penetration for 3couples
|
|
Options
- Inspection window with shielded polycarbonate glass 20cm Diam.
- Feed-through panels, pipes connector
- multi holes feed-thru fibre optic penetration for 3 or 6 couples.
- Multimedia filter: n.1DB-9, N.2 USB, N.2 RJ45, N.1 DB9 (RS232) filtered connectors
- TDK 6mm. ferrite tiles on the bottom
- Honeycomb air vents
- Exhaust fan
|