General equipment

• Charger Friwo MPP-15 with two- or three-poled connector, Type Binder 712. The two-poled version is the standard and is used by other manufacturers in the section of EMC-measurement engineering. Three-poled connectors are used with our devices which have internal batteries as well as a possibility to connect additional external batteries. 1-10 cells NiMH and NiCd, charging current approx. 700mA. Available from stock

• Charger Friwo MPP-15 without alteration for the use with own connectors or with the provided adapters (several phone jacks and DC-connectors). Available from stock

• Chargers for single cells, e.g. for digital cameras, remote controls etc.

• Charging cable, one side with two- or three-poled connector, Type Binder 712, the other side with 4mm-lab-connectors (banana connectors) for the use with available chargers with 4mm-connectors

• Charger for lead-acid batteries, different versions available. Please specify your requirements such as battery-voltage(s) and charging current

• Optical cables, simplex and duplex optical cables with FSMA-connectors with the lengths 10m, 20m, and 30m are generally delivered from stock. Other lengths and other connectors (ST, LC etc.) are mostly available at short notice.

• Bushings/adapters for optical cables with FSMA-connectors delivered from stock, other connectors available on demand

• Power supply 6V/1A,7V/1A (e.g. for dAV-R /Audio-/Video-receiver), available from stock

• Power supply 12V/2.5A, e.g. for the multichannel dAV-receiver, available from stock

• Battery cable for batteries in cameras (two-poled, Binder 712), different lengths

• Battery cable for additional external batteries (three-poled, Binder 712) for Type U and optoLVDS, length approx. 15cm

• Connector cable with 12-poled plug (Binder Series 680), compatible to Rohde & Schwarz antennas and measuring adapters and to the power supply BV10D

• Different adapters BNC-cinch, Cinch-Scart, BNC-N etc. of renowned manufacturers (Telegärtner, Rosenberger, Hirschmann,...)

• Power cables, foreign versions available as well

 

Accessories for the Type U analog transmitter

• Input filters for Type U analog transmitters with the frequencies 10kHz, 100kHz, 250kHz, 1MHz, 10MHz, 20MHz, 30MHz, and divider-ratios of 1:1, 2:1, 3:1, and 4:1 are available at short notice. Other frequencies and dividers on demand.

• Output filters for Type U analog receivers with the frequencies 10kHz, 100kHz are now available. With these filters the use of Type U-receivers for emission and susceptibility tests is made easier. Interfering high-frequency signal parts are reduced to a great extent and external interferences incriminates the receiver output to a much lesser extent. These filters have the same housing as the provided input filters.

Accessories for the AV-series

• External displays for the camera systems dAV-C (3.5"). The displays are delivered with a fixed connector cable which is compatible to our cameras. These displays are also available without alteration for the use in your own projects. For power supply, you will then need an according power supply unit with 12V/400mA and a 2.1mm-DC-connector. An AV-connector cable is provided.

• Wooden tripods for the mounting of cameras etc. in suceptibility tests. Wooden tripods have already been used for a long time in the EMC-section since they are not conducting. Several manual pan/tilt units are available for the tripods as well as a pan/tilt units which can be connected to the camera dAV-Cr and controlled by the receiver DAV-Rr.

• AV-cable with Cinch- or Scart-connectors, of different lengths.

• Wide-angle, tele and close-up lenses for videocameras and digital cameras.

Personal Computers

• Network cables, USB cables, computer equipment and components, complete systems

Digital photography

• Digital cameras for documentation (we can provide all current manufacturers such as Olympus, HP, Canon, Sony, Casio, Pentax, Panasonic, Fujifilm, Nikon etc. and the according accessories from companies like Sigma, Tamron, Metz, Soligor, B+W etc.)

• Wide-angle, tele and close-up lenses for videocameras and digital cameras

• Memory cards, card readers, batteries, flashlights, and further equipment for digi-cams

General lab-equipment

• Display units for monitoring, chassis for 19"-racks, holders for walls and ceilings
• Power supplies, measuring devices, cables, and lines

Misc

• Prototype cases, individual items. If you need a small amount of a specific case for your requirements, we will gladly help you within the limits of our technical facilities (CNC-lathe and milling machines, drilling machines, saws,...).

• For the secure transportation of our measuring devices we can offer you a customized plastic suitcase which is specially made to fit your requirements.