Name
|
Picture
|
Description
|
Monopole Section
|
|
Included in Monopole Probe Stand Kit. The top section of the Monopole. Holding the 4x 1" wooden dowels
|
Monopole Base
|
|
Included in Monopole Probe Stand Kit. The base is made up of a polyurethane-coated piece of plywood ruffly 15" x 15" x ¾" w/easy slide pads on the bottom to help with saying level to the floor and a plastic base for 3x 1" dowels.
|
MP- Ballast Bag
|
|
One is included with Monopole Probe Stand Kit. This can be filled with a weighted material (e.g., Sand) to make the base heavier. It may not be needed in all cases, dependent on user loading.
|
MP-Extension
|
|
Included in Monopole Probe Stand Kit. An extension piece to use another set of dowels (3 more 1") to extend the height. Add 36" (91.5 mm) to the height
|
Tripod Head
|
|
Included in Monopole Probe Stand Kit. It sits on top of a 1" wood dowel. Select a size (¼” – 20, 5/16” – 18, 3/8” – 16)
|
TP-Leveling Bubble
|
|
Included in Monopole Probe Stand Kit.
It is used to see the level of the tripod. Clips on to 1” center dowel and is rotated to any side for easy viewing.
|
TP-Weight Ballast
|
|
A bag is included with your order. Nonmetallic weighted materials can be used to fill the bag to make the base sturdier.
|
TP-22mm Antenna
(Optional)
|
|
Antenna adaptor for 22mm antenna tube mount. It sits on top of a 1" wood dowel
|
TP-Ball Head
(Optional)
|
|
Ideal for Camera positioning. Full rotation to 90° polarization ¼” – 20 thread screw. For loads less than 2lb. The arm can be positioned after the head is screwed to the camera, allowing it to be placed to the rear.
|
TP-Cable Support
(Optional)
EMC EPS Block 1M
|
|
Can be used to support cables coming out of antenna or EUT, to keep them up from the floor, or to reduce strain on connectors.10-¼” x 1-½” (28 x 3.8 cm)Use with 1 meter EPS support for longer support.
|
TP-Item Tray
(Optional)
|
|
A tray to hold items on top of the tripod. 8” x 8” (20 x 20 cm)
|
MP-Probe Adaptor
|
|
4x Included in Monopole Probe Stand Kit. Attaches with a thumbscrew to 1" wood dowels, extend out 5-3/4" (145mm) from the dowel
Includes:
¼-20 plastic screw for probe mount.
A 2-3/4" (70mm) extension is provided to offset the probe if positioning where MP-section or MP-Extention is located
|
MP-Rotator
(Optional)
|
|
For rotating the camera or object over the top of the test bench to view the top of EUT/DUT. Freedom to rotate 360 deg in all directions.
-Use to help hold up cables.
-Use to add a second mount to any tripod/monopole
|
TP-Bag
(Optional)
|
|
Travel bag for storing and caring the tripod size: 39” x 7”
|
TP-Bag Deluxe
(Optional)
|
|
Wheeled travel bag for storing and caring the tripod and accessories 40” long (36”x10”x12” internal) large enough to hold additional EMI test gear and accessories. Padded with Velcro partitions
|
Custom Antenna Adaptors
|
|
Designed for your antenna to rotate on center, at the center of gravity. Designed from pictures and measurements done on your end. 6 months of free updates if the design is not acceptable.
|
Other?
|
Have an idea for an accessory to make the tripod more versatile please let us know
|