• Langer PA 303 N Set | 100 kHz to 3 GHz RF Preamplifier
  • Langer PA 303 N Set | 100 kHz to 3 GHz RF Preamplifier
  • Langer PA 303 N Set | 100 kHz to 3 GHz RF Preamplifier
  • Langer PA 303 N Set | 100 kHz to 3 GHz RF Preamplifier

Langer PA 303 N Set | 100 kHz to 3 GHz RF Preamplifier

100 kHz to 3 GHz | 30 dB gain | N-type | 50 ohm

The Langer PA 303 N Set amplifies weak near-field probe signals for EMC troubleshooting. Noise figure 4.5 dB. Supply 12 V DC at 65 mA. Includes the amplifier, plug-in power supply and system case.

PARTNER:

MARKETS:

CATEGORIES:

TEST STANDARDS:

Langer 303 N Set Datasheet

SPECIFICATIONS

PA 303 N Set near-field RF preamplifier

30 dB gain for N-type cables and instruments. Use it to raise low-level RF signals before a spectrum analyzer or a 50 ohm oscilloscope input when tracing emissions from PCBs and ICs.

Technical specifications

ParameterSpecification
Frequency range 100 kHz to 3 GHz
Gain 30 dB
RF connectors N-type input and output
RF impedance 50 ohm
Noise figure 4.5 dB
Output 1 dB compression point +10 dBm
Maximum RF input power +13 dBm
DC supply voltage 12 V DC
Current consumption 65 mA
Amplifier weight 300 g
Amplifier dimensions 57 x 47 x 26 mm
Set weight 500 g

Included components

ItemQty.Description
PA 303 N 1 N-type RF preamplifier
NT FRI EU 1 Plug-in power supply listed on the set sheet. Confirm the regional plug when ordering.
A5 case 1 System case

Preamplifier and frequency response

PA 303 N, Preamplifier 100 kHz up to 3 GHz
PA 303 N, Preamplifier 100 kHz up to 3 GHz
Frequency response
Frequency response
Frequency response (detail)
Frequency response (detail)

Connect the measurement chain

Connect the near-field probe to the amplifier input with a 50 ohm coaxial cable rated for the band of interest. Connect the output to the instrument and power the amplifier with the supplied adapter. Account for amplifier gain and cable loss when interpreting absolute signal levels. Check both amplifier compression and the instrument input limit when strong signals are present.

Browse near-field probes

Compare Langer preamplifier sets

PhotoModelFrequency rangeRF portsGainNoise figureOutput P1dB
PA 203 BNC Set kit PA 203 BNC Set 100 kHz to 3 GHz BNC 20 dB 4.5 dB 0 dBm
PA 203 SMA Set kit PA 203 SMA Set 100 kHz to 3 GHz SMA 20 dB 4.5 dB 0 dBm
PA 303 BNC Set kit PA 303 BNC Set 100 kHz to 3 GHz BNC 30 dB 4.5 dB +10 dBm
PA 303 SMA Set kit PA 303 SMA Set 100 kHz to 3 GHz SMA 30 dB 4.5 dB +10 dBm
PA 303 N Set kit PA 303 N Set 100 kHz to 3 GHz N-type 30 dB 4.5 dB +10 dBm
PA 306 SMA Set kit PA 306 SMA Set 100 kHz to 6 GHz SMA 30 dB 3 dB +10 dBm
PA 3010 Set kit PA 3010 Set 10 MHz to 10 GHz SMA 30 dB typ. 2.5 dB typ. at 5 GHz +18 dBm typ. at 5 GHz
PA 2522 Set kit PA 2522 Set 10 MHz to 22 GHz SMA 25 dB typ. 3 dB typ. at 10 GHz +15 dBm typ. at 10 GHz
OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...