CDG CMP-46 Current Monitoring Probe

CDG CMP-46 Current Monitoring Probe, with Calibration Set

CDG CMP-46 Current monitoring probe • Cable diameters up to 45 mm • Frequency range 10 kHz to 400 MHz • For BCI testing acc. to ISO 11452-4 and others • Insertion impedance < 2,5 ?

PARTNER:

SCHLöDER GMBH

MARKETS:

TEST STANDARDS:

IEC/EN 61000-4-6 ,
MIL-STD-461 ,

Data Sheet

SPECIFICATIONS

CDG CMP-46

Current monitoring probe

· Cable diameters up to 46mm

· Frequency range 10 kHz to 400 MHz

· Closed constructiom

· For BCI testing acc. to ISO 11452-4 and others

· Insertion impedance < 2.5 ohm

CMP-46 can be used as a current monitor for BCI tests (ISO 11452-4, MIL-STD 461, DO-160 and others as well as IEC / EN 61000-4-6.

Current monitoring probes can be used for RF current measurements with the advantage that the circuit is not loaded and therefore normal operation of the DUT is possible during the measurement. The CDG CMP-46 measures RF common mode currents (asymmetrical currents) of single conductors or conductor bundles (the sum of the currents considering the sign is important).

Current Monitoring probes may be used for RF current measurements with the advantage that there is no loading of the circuit, thus allowing normal operation of the DUT while the measurement is done. The CDG CMP-46 measures RF common mode currents (asymmetrical currents) of single conductors or bundles of conductors (the sum of currents considering the sign is of importance).

The current measurements are made by placing the current carrying conductor inside the central opening of the probe and measuring the output voltage by means of an RF voltmeter, which can be converted to the equivalent current value.

The CMP-46 can be used as current monitor for BCI testing (ISO 11452-4, MIL-STD 461, DO-160 and others as well as acc. to IEC / EN 61000-4-6 chapter 7.4.