Including short cable with SMA plugs to connect the BBV 9719 with the antenna (for example BBHA 9170)

Low Noise Low Power Wideband Amplifier for increasing sensitivity at field strength- measurements and for general attenuation measurements up to 26.5 GHz (nominal frequency range). A power supply with 12 V / 300 mA DC (e.g. optional AC/DC adaptor, laboratory power supply, rechargeable battery) is required for operation. In- and Output of the Broadband Amplifier are sensitive to Electrostatic Discharge. Therefore some precaution (discharging coaxial cables and persons) is required before touching the amplifier!

The amplifier Input comes with SMA female connectors. A coaxial microwave cable of 0.5 m length is supplied to connect the Antenna with the Amplifier. The cable is equipped with SMA-male connectors. The amplifier is equipped with a female 3/8" camera thread to be connected to a mast, e.g. to AM 9144. The antenna itself is mounted with another 3/8" screw at the amplifier base. The polarisation swivel can easily be achieved within seconds by a further screw in 45° steps using fixing bolts for indexing.

It is very important to avoid bending and torsion of the microwave cable, otherwise persistent damage may be a result. Therefore we recommend mounting the antenna in a way that the antenna connector points in the opposite direction as the RF-Input of the amplifier. This allows a smooth routing of the microwave cable with a wide bending radius.

Options:

Option Akku: Rechargeable battery pack for  9719.

Option ALCS 2-24A: Battery charger ALCS 2-24A for rechargeable battery pack.

Option PS: Power supply for BBV 9718 or 9719.