PC-Attenuators & RF Connections

The TBCAS1 coaxial adapter set contains 44 pieces of the most common 50 Ohm coaxial adapters in a beechwood box

SMA and N-connector torque wrenches for repeatable RF connector tightening.

• Economical SMA torque wrench to ensure consistent and reliable connections for RF/microwave measurements
• Break-over type with a standard SMA 5/16″ (8mm) opening
• Bidirectional operation
• Default factory calibration: 0.5 Nm
• Torque accuracy: ± 0.05 Nm

The TBAS3 RF 10W attenuator set consists of a 3dB, 6dB, 10dB and 20dB attenuator in a beech wood box.

The TBAS1 RF 2W attenuator set

The TBAS2 RF SMA attenuator/termination set consists of a 3dB, 6dB, 10dB, 15dB, 20dB and 30dB SMA attenuators in a beechwood box. Furthermore, it contains two pieces SMA 50 Ohm terminations.

The TBATTs are DC - 3GHz attenuators available with 3 - 30dB attenuation in 10-100W versions.  N male to N female connections.

TBTER-50 Ohm RF Terminations from 0.5W to 25W

7-Piece BNC Adapter Set

• 4 BNC-to-4 mm banana adapters
• 2 BNC-to-terminal-block adapters
• 1 50 Ω BNC feed-through termination

6GHz 2W N Attenuator Set

Four N-connector attenuators rated to 6 GHz and 2 W, supplied as a boxed set.

• Frequency range: DC – 6GHz
• VSWR; 3, 6, 10, 20 dB: < 1.2
• Tolerance; 3, 6, 10, 20 dB: <+/- 0.3 dB
• Power rating: 2W @ -55 to 40°C; up to 70°C with 50% power de-rating
• Connectors: N-male / N-female; bidirectional

Compleat your pre-compliance setup with premade coax cables. 

TBRFH1–TBRFH7 RF Housings

Compare seven TekBox RF housing families by connector arrangement and mechanical format for RF prototyping.

• TBRFH1 — RF enclosure family for prototyping connectorized RF circuits and passive building blocks.
• TBRFH2 — N-connector RF housing for assembling passive circuits operating at frequencies up to 6 GHz.
• TBRFH3 — Machined-aluminum RF housing family for prototyping splitters, couplers, mixers and similar circuits.
• TBRFH4 — Machined RF housing with SMA connectors and a power feed-through for amplifier and circuit prototypes.
• TBRFH5 — Machined RF housing with SMA connectors and a power feed-through for amplifier and circuit prototypes.
• TBRFH6 — Machined RF housing with SMA connectors and a power feed-through for amplifier and circuit prototypes.
• TBRFH7 — BNC-connector RF housing for assembling passive circuits operating at frequencies up to 6 GHz.

RF Power Splitters, Combiners and VSWR Bridges

Compare two-way RF splitters and combiners with VSWR bridges for forward and reverse power measurements.

• TBRFPSX — Family of two-way RF power splitters/combiners for distributing and combining signals.
• TBSWR-200K500 — High-power VSWR bridge for forward/reverse power measurements from 200 kHz to 500 MHz.
• TBSWR-300K6000 — General-purpose VSWR bridge for forward/reverse power measurements from 300 kHz to 6 GHz.
• TBSWR-600K700 — High-power VSWR bridge for forward/reverse power measurements from 600 kHz to 700 MHz.
• TBSWR-60K500 — High-power VSWR bridge for forward/reverse power measurements from 60 kHz to 500 MHz.