CABAI20050, 200W, 50 A, 2:1, Audio Isolation Transformer
ONYX 16, 16kV ESD Simulator
ONYX 30, 30kV ESD Simulator
PG1275E - MIL-STD-1275E Surge/Spike Test Generator
CABCI250R, 200W, 0.5 Ohm Shunt Resistor
CABCI251R, 200W, 1.0 Ohm Shunt Resistor
CABDO160CR, >600V Voltage Spike Generator, DO160 Sec 19
PG1275 - MIL-STD-1275D Surge/Spike Test Generator
Products
PG1275F - MIL-STD-1275F Surge/Spike Test Generator
Benefits of the PG1275F Pulse Generator
- MIL-STD-1275F Compliant: Dedicated design for conducted susceptibility testing on 28 VDC circuits.
- Spike & Surge Testing: Handles spikes up to 250 V / 250 mJ and surges up to 100 V / 1210 J.
- High Current Capability: 16 A continuous or up to 400 A with the optional DM400 decoupling diode module.
- Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
- User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.
Enhance your EMC testing with the 1275F Pulse Generator—precision, compliance, and versatility combined.
CABAI20050, 200W, 50 A, 2:1, Audio Isolation Transformer
Audio Transformer 200W, 50A
- 160x155x200mm
- 2:1 ratio
- 200 W Maximum30Hz - 250 kHz
- 100 W Maximum at15 Hz - 30 Hz
- Insulation Resistance Test - 2kV
ONYX 16, 16kV ESD Simulator
Onyx 16
- +/- 16kV air and Contact Discharge
- 150pF/330Ohm Standard, Other networks available
- >16 hour Battery life, AC mains option
- Optional Software
ONYX 30, 30kV ESD Simulator
Onyx 30
- +/- 30kV air and Contact Discharge
- 150pF/330Ohm Standard, Other networks available
- >16 hour Battery life, AC mains option
- Optional Software
PG1275E - MIL-STD-1275E Surge/Spike Test Generator
Benefits of the PG1275E Pulse Generator
- MIL-STD-1275E Compliant: Dedicated design for conducted susceptibility testing on 28VDC circuits.
- Spike & Surge Testing: Handles spikes up to 260V / 2J and surges up to 200V / 470J.
- High Current Capability: 16A continuous or up to 400A with the optional DM400 decoupling diode module.
- Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
- User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.
Enhance your EMC testing with the PG1275E Pulse Generator—precision, compliance, and versatility combined.
CABCI250R, 200W, 0.5 Ohm Shunt Resistor
0.5 Ohm 1% Shunt Resistor, 200W
- used in MIL-STD, FORD, and other standards
- Low Inductance
- High Precision
CABCI251R, 200W, 1.0 Ohm Shunt Resistor
1.0 Ohm 1% Shunt Resistor, 200W
- used in MIL-STD, FORD, and other standards
- Low Inductance
- High Precision
CABDO160CR, >600V Voltage Spike Generator, DO160 Sec 19
- DO 160 Section 19 Compliance: Generates chattering relay spike trains meeting RTCA DO 160 §19.3.5 and Boeing D6-16050-4 §7.5.2 requirements.
- Adjustable High Voltage Pulses: Up to 600 V burst amplitude, 0.2–10 µs spike width, 50–1000 µs burst duration.
- Intuitive Touchscreen Interface: 7″ display for real time control of polarity, burst length, and duty cycle.
- Dual Monitor Outputs: Two 1:1 Banana ports (≥100 MHz bandwidth) for precise oscilloscope verification.
- Robust Safety Design: Shrouded banana outputs, reinforced HV wiring, earth ground lug, and IP3X enclosure.
- Compact & Portable: 235 × 180 × 140 mm, 2.3 kg—ideal for laboratory or on aircraft test environments
PG1275 - MIL-STD-1275D Surge/Spike Test Generator
Benefits of the PG1275 Pulse Generator
- MIL-STD-1275D Compliant: Dedicated design for conducted susceptibility testing on 28 VDC circuits.
- Spike & Surge Testing: Handles spikes up to ±500 V and surges up to 125 V.
- High Current Capability: up to 400 A .
- Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
- User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.
Enhance your EMC testing with the 1275D Pulse Generator—precision, compliance, and versatility combined.
