Fiber-optic Links & Cameras

The optoSPI-HS system can be used for the bidirectional optical transmission of SPI signals with transmission rates of up to 1Mbit/s. It consists of two battery supplied transceivers connected to each other with an optical fiber. With the optical transmission of the shielded case and the external filter, the system is well equipped for EMI and EME tests.

The optoUSB2.0-VA6K is the successor of the optoUSB2.0-RBDIR. The optoUSB-2.0-VA6K system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0. It can be used to transmit USB-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

• optoUSB2.0-VA6K uses a Rosenberger connector which has been proven to be more EMI robust)
• optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
• optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)

These measuring systems are used for the optical, digital transmission of analog signals:

• With a resolution of 10 Bit
• maximal analog bandwidth of 10 MHz.

The optoUART system can be used for the optical transmission of UART-signals up to a data rate of 1 Mbit/s.

It can be used to transmit UART-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

This system is used for the optical transmission of Flexray-signals and allows the transmission in both directions with a sampling rate of 10 MBit/s. It consists of two identical transceivers, supplied by batteries, and a simplex-62,5/125µm-multimode optical cable (1-fiber-version available on demand).

These measuring systems are used for the optical, digital transmission of analog signals:

• With a resolution of 8 Bit
• maximal analog bandwidth of 50 MHz.

opto1394 This system is used for the optical transmission of IEEE1394/Firewire-signals and can transmit data rates of up to 400 Mbit/s (800 Mbit/s at 1394b). The transmitter system consists of two similar transceivers supplied by batteries and a duplex-62,5/125µm-multimode optical cable. Due to its insensitivity against strong electromagnetic fields, the opto1394 is fit for tests of electromagnetic compatibility in EMC-test chambers, TEM-cells, and striplines. The system can also be used for the fail-proof transmission of signals across long distances.

ptoTTL 5-3-u is used for the optical transmission of TTL (Transistor-Transistor Logic) 3.5 & 5 V TTL signals digital signals. Up to 16 digital signals with a sampling rate of 40 MS/s (each channel) can be transmitted. The system consists of a transmitter supplied by batteries, a simplex-62,5/125µm-multimode optical cable, and a receiver – which has integrated batteries as well.

The optoK system can be used for the optical transmission of K-Line signals with transmission rates of more than 30kbit/s at supply voltages of up to 24V. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

The Motion Detection Software (mk-motion) analyses video images of a test object to detect deviations between target and actual behaviour. The mk-motion motion detection software is thus an optimal support for your EMC technician in his daily requirements.

LSAOL 1.2 Laser-Powered Analog Optical Link

• Laser-powered RF over fiber — no batteries required
• Wideband coverage from 1 MHz to 3 / 4 / 6 GHz
• Eliminates coaxial cable loss and grounding issues
• Modular RX/TX configuration with optional LNA
• >100 m fiber length for EMC chambers and antenna measurements
• Ethernet control with SCPI for automated test systems

Mini EMI Camera for Low Emission / High Field Use

• For use in very small spaces
• Integrated microphone 
• Battery or wall-powered
• Single Fiber operation (duel direction)
• Options for HIRF, recording, motion triggering, OCR, ...