• CDN BCI-P1 Bulk Current Injection Probe 1 MHz – 400 MHz
  • CDN BCI-P1 Bulk Current Injection Probe 1 MHz – 400 MHz
  • CDN BCI-P1 Bulk Current Injection Probe 1 MHz – 400 MHz
  • CDN BCI-P1 Bulk Current Injection Probe 1 MHz – 400 MHz

CDN BCI-P1 Bulk Current Injection Probe 1 MHz – 400 MHz

BCI-P1 Bulk Current Injection Probe 10 kHz – 400 MHz - Meets specifications of ISO 11452-4:2005 and IEC 61000-4-6 - Frequency range from 1 MHz up to 400 MHz - Designed for automotive BCI testing - Low insertion loss (1MHz - 400MHz) to test bellow 1MHz (IEC/DO/MIL) see CDN BCI-P1_MT-1

PARTNER:

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

CDN BCI-P1

Bulk Current Injection Probe 1 Mhz – 400 MHz

 

  • Meets specifications of ISO 11452-4:2005 and IEC 61000-4-6
  • Frequency range from 1 MHz up to 400 MHz
  • Designed for automotive BCI testing
  • Low insertion loss

 

The Bulk Current Injection Probe is used to inject RF-current into cables of electrical equipment to test the susceptibility against radiated electromagnetic energy.

It was designed to meet the specifications of ISO 11452-5:2005 and IEC 61000-4-6 standards for automotive BCI testing with secondary currents of 300 mA and more.

The probe can be easily clamped around test conductors and supports cable harness diameters up to 40 mm diameter.

 

Specifications

Frequency range

1 MHz – 400 MHz

Input Connector

Type N Female

Inner diameter

40 mm

Outer Diameter

120 mm

Width

40 mm

Max. core temperature

90 °C

Turns Ratio

1:1

Primary inductance

5.1 µH @ 100 kHz

Ambient temperature

0 to 40 °C

Fastening

1 Clip

Input Power rating until core temperature is 90 °C

90 min @ 70 W (48.45 dBm)

45 min @ 100 W (50 dBm)

 

The calibration jig is used for insertion loss measurement of the Bulk Current Injection Probes and meets ISO 11452-4 and IEC 61000-4-6 standards.

 
OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...