SR100-6W, adaptor 150 Ohm to 50 Ohm, 100 Ohm resistor
- Adapter for the calibration of a CDN
- For ISN S1, ISN S8, CDN, or a CDNE
- EN 61000-4-6, EN 55015, CISPR 15, CISPR 16-1-x, CISPR 16-2-x
- DC - 500 MHz
- 6 W
PARTNER:
MARKETS:
TEST STANDARDS:
SR100-6W B Data Sheet
SPECIFICATIONS
SR100-6W, adaptor 150 Ω to 50 Ω, 100 Ω resistorThe SR100-6W B is an adapter for the calibration of a CDN (e.g. ISN S1, ISN S8) or a CDNE. Therefore it matches the 50 Ω measurement port to the 150 Ω system. A low inductance resistor of 100 ? is connected between the inner conductor of the N connector and the 4 mm banana jack. The construction is according to picture 7 of the standard EN 61000-4-6.
|
OTHER PRODUCTS IN THE SAME CATEGORY:
CDNE M2, 2 lines, Coupling & Decoupling Network, CISPR 15
SR100-6W, adaptor 150 Ohm to 50 Ohm, 100 Ohm resistor
AN-ABCD-300, 300 Amp Artificial Network, EV HV Testing
AN-ABCD-60, 60 Amp Artificial Network, EV HV Testing
CABCISPR2532A, CISPR 25, 5uH, 32 A LISN
CABCISPR2515A, CISPR 25, 5uH, 15 A LISN
Cx 10000-xxx-xxx, 1000V, 100 - 600 amp 10mF HV Capacitor Cabinet
NSLK 8117, 9 kHz - 30 MHz, 250V / 10A, 50 µH, 2 Path LISN
NNBM 8124, 10 kHz - 150(400) MHz, High Voltage, 70A, single path, 5µH LISN
MDS 21 C, 30 - 1000 MHz, EMI Absorbing Clamp
NTFM 8131 A, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
NNBM DO160-1500, 10 kHz - 400 MHz, 200A, 5µH LISN, DO-160
NNBM 8126 A890, 10 kHz - 400 MHz, 75A, 5µH LISN, DO-160
NNBL 8226-2, 9 kHz - 100 MHz, 70A, 50µH, Two Path LISN
NNBL 8226-HV, 9 kHz - 100 MHz, 70A, 50µH, Single Path LISN
NNBL 8226, 9 kHz - 100 MHz, 70A, 50µH, Single Path LISN
NNBL 8225, 9 kHz - 100 MHz, 20A, 50µH, Single Path LISN
NSLK 8126, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 4 Path LISN
NSLK 8127, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 2 Path LISN
