• NNBL 8229-HV, 9 kHz - 100 MHz, 200A, 50µH Single Path LISN
  • NNBL 8229-HV, 9 kHz - 100 MHz, 200A, 50µH Single Path LISN
  • NNBL 8229-HV, 9 kHz - 100 MHz, 200A, 50µH Single Path LISN
  • NNBL 8229-HV, 9 kHz - 100 MHz, 200A, 50µH Single Path LISN

NNBL 8229-HV, 9 kHz - 100 MHz, 200A, 50µH Single Path LISN

  • Measurement of interference for MIL-STD-461/462
  • 9 kHz - 100 MHz
  • 1000VDC / 800VAC 50/60Hz 
  • Max current 200A
  • Impedance of each path: 50 µH +5 Ω || 50 Ω ±20 %

PARTNER:

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

 

NNBL 8229-HV, 9 kHz - 100 MHz, 200A, Single Path, 50µH LISN

This Line–Impedance Stabilisation Network (LISN) is designed according to MIL-STD-462D, MIL-STD-461E, MIL-STD-461F, or MIL-STD-461G respectively (Measurement of Electromagnetic Interference Characteristics).

This corresponds to older versions of CISPR 16–1-2 Chapter 4.2 for a single path with 50 μH + 5 Ohm || 50 Ohm. In opposite to newer CISPR versions, MIL has no requirements regarding the phase of the impedance or the decoupling between the mains and DuT side of the LISN.

The impedance characteristic is realized according to MIL-STD-461E/F/G. The continuous current rating is 200A, for a short time more than 250 A is possible. The EuT is connected to the wing terminals at the front panel. The mains terminals are on the backside.

 

Specifications:  
Frequency Range: 9 kHz – 100 MHz
Max. cont. current: 200 A
   
Max. voltage DC: 1000 V
Max. voltage 50/60 Hz: 800 V
   
Impedance: 50 µH + 5 Ω || 50 Ω ±20 %
DC Resistance of coil: < 3 mΩ
   
Connector EuT: wing terminals, 12 mm, removable
RF output: BNC (optional N)
Dimensions incl. connectors: width x height x depth: 300 mm x 350 mm x 370 mm
Weight:4.4  10.5 kg
According to standard: MIL-STD-461E/F/G

 

 

 
OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...