CAP 10-8226-2, 10 µF Capacitor for MIL-STD-461 CS101, CS106

To be compliant to the standards DEF STAN 59 and DO 160 a 10 μF capacitor like the CAP 10 has to be connected to the mains connectors of the LISN.

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

 

CAP 10-8226-2, 10 µF Capacitor for MIL-STD-461 CS101, CS106+


To be compliant to the standard MIL 461F (method CS 101-4 and CS 106-3) a 10 μF capacitor like the CAP 10 8226-2 has to be connected to the mains connectors of the LISN.

 

Specifications:  
Capacity: 10 µF ±10%
Dielectric strength: 1000 VDC
Max. voltage at 50/60 Hz 640 VAC
Max. voltage at 400 Hz 600 VAC
Max. voltage at 890 Hz 270 VAC
Max. current: 15 A
Distance wing terminals: 190 mm
Ambient temperature: -25° … +60°C
Weight: ca. 230 g
According to standards: MIL 461F (Method CS 101-4; CS 106-3)

 

Instructions for use:

The capacitor CAP 10 8226-2 has to be connected to the EUT wing terminals at the front panel of the NNBL 8226-2 LISN. The allowed maximum values of the LISN as well as of the CAP 10 8226-2 have to be considered by all means. Due to the high capacitance of the CAP 10 8226-2 high leakage current to ground do occur. Thus operation with a residual current operated circuit breaker is not possible.

The picture shown shows a capacitor placed on the AE side of LISN, standard required it to be placed on EUT side. The connection is the same on the other side. 

Note:

The LISN has to be connected to protective earth before connecting any mains to it. Only trained personnel may use this equipment.

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...