Transient Generator

• Turnkey EMC test solution — ready to use with full hardware and software integration
• Fast voltage transitions (<5 µs) for full compliance with critical standards
• Covers all major IEC/EN 61000-4-X tests including -11, -13, -14, -27, -28, -34
• User-friendly ACSControl software with built-in test libraries and reporting
• Modular, scalable power platform from 30 kVA up to 2000+ kVA
• Versatile use beyond EMC: ideal for grid simulation, anti-islanding, and inverter testing
• Compact 19" rack-mounted units — easy system integration and footprint optimization
• Certified for global compliance (CE, UKCA, RoHS, EN/IEC EMC and safety standards)

Onyx 16

• +/- 16.5kV air and Contact Discharge
• 150pF/330Ohm Standard, Other networks available
• >16 hour Battery life, AC mains option
• Optional Software

PEFT 8010 

• EFT/Burst
• Up to 7.3kV (6.6kV at CDN)
• CDN: 264V-AC 16-440Hz, 125V-DC
• CDN: 16A-AC @ 50-60Hz, 10A-AC @ 400Hz, 16A-DC

PSURGE 30.2 

• Surge System
• Up to 30 kV impulse voltage
• Up to 30 kA impulse current

Axos 5 - Compact

• Multi Tester with 16AMP CDN
• EFT/Burst 5kV IEC 61000-4-4
• Surge, Combination Wave 5kV IEC 61000-4-5
• Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
• AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
• DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)

Axos 8 - Compact

• Multi Tester with 16AMP CDN
• EFT/Burst 5kV IEC 61000-4-4
• Surge, Combination Wave 7kV IEC 61000-4-5
• Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
• Ring Wave, 7kV IEC 61000-4-12 & ANSI
• Telicomm Wave, 7kV IEC 61000-4-5 & ITU
• AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
• DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)

MAG 1000

• 1-120A/m Contiunus testing
• 100-1100A/m Short Duration 1-3sec
• Test either 50Hz & 60Hz Selectable
• 1m square Loop

Onyx 30

• +/- 30kV air and Contact Discharge
• 150pF/330Ohm Standard, Other networks available
• >16 hour Battery life, AC mains option
• Optional Software

The oscillatory wave generator IPG 2554 S has been designed for immunity testing of electrical and electronic equipment against repetitive damped oscillatory waves according to IEC 61000-4-18 requirements. It generates a decaying sine waveform with ringing frequency from 100 kHz and 1 MHz. These are considered the slow waves. These waveforms represent disturbances occurring in power, control, and signal cables installed in high voltage and medium voltage stations and in heavy industrial installations.

The Wood Test Table is a simple, inexpensive solution for your EMC testing. The table is built to be ship flattened to reduce shipping costs and easily assembled on site quickly. The picture is shown with a ground plane.

The oscillatory wave generator IPG 2554 F has been designed for immunity testing of electrical and electronic equipment against repetitive damped oscillatory waves (DOW) according to IEC 61000-4-18 requirements. It generates a decaying sine waveform with ringing frequencies 3, 10, and 30.0 MHz. These waveforms represent disturbances occurring in power, control and signal cables installed in high voltage and medium voltage stations and in heavy industrial installations.

• Technologically advanced, fast-switching, compact 19-inch power supplies
• High control dynamics in the 100...200 µs range – even at higher power levels
• Exceptional current accuracy of <0.02% FS, additional high-resolution current measurement range included as standard
• Full power regeneration and a high degree of efficiency, resulting in a significant reduction of energy consumption and heat dissipation, low acoustic noise
• Wide current-voltage range with an auto-ranging factor of 3
• Full digital CV, CC, CP, CR, and Ri-Sim control modes