Fiber-optic Links & Cameras

The Marvell® 88Q2112 solution is a single pair Ethernet physical layer transceiver (PHY) for 100/1000Base-T1 signals. Our optoLAN-88Q2112 is suitable for EMC tests of devices with this kind of chipset. The standard connector is a 4 pole Rosenberger HSD to minimize the emission of our optical link.

The Marvell® 88Q1010 solution is a single pair Ethernet physical layer transceiver (PHY). Our optoLAN-88Q1010 is suitable for EMC tests of devices with this kind of chipset. The standard connector is a 4 pole Rosenberger HSD to minimize the emission of our optical link.

The optoLIN system can be used for the optical transmission of LIN signals with transmission rates of up to 20kbit/s. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

The optoCAN-SW system can be used for the optical transmission of single-wire CAN signals with transmission rates of up to 33kbit/s (max. 83kbit/s). It optical transmitter of single-wire CAN signals: optoCAN-SWconsists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

The optoCAN-LS system can be used for the bidirectional optical transmission of CAN optical transmitter for low speed-CAN signals with transmission rates of up to 125kbit/s. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

The optoCAN-HS system can be used for the bidirectional optical transmission of CAN-signals with transmission rates of up to 1Mbit/s. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

The optoCAN-FD system can be used for the bidirectional optical transmission of CAN-signals with transmission rates of up to 10 Mbit/s. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

The dAV-Cr-HD-30-nd camera comes with 30x optical zoom and can be used for the optical and acoustical monitoring of devices under test during EMC measurements. It has an integrated mono microphone and can be locally controlled via eight buttons on the rear case side or via remote control from the control room. The integrated short range LEDs are helpfull for dark test conditions.  Because of the HD-resolution, high quality DUT surveillance can be done. With the optical transmission and the shielded case, the camera is well equipped for EMI and EME tests. Counterpart is a receiver of the dAV-Rr-HD series. No PC needed for display!

U-DC

• High-resolution (16 bit)
• Measurement Display
• +/-60V input; +/- 6V or +/-12V output (customizable)
• Up to 40 samples / s (remote access, moving mean mode, programmable)
• Multi-channel receiver with Display and remote data access via USB, GPIB,...

These measuring systems are used for the optical, digital transmission of analog signals:

• With a resolution of 8 Bit
• maximal analog bandwidth of 50 MHz.

The optoUSB-2.0 system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0. It can be used to transmit USB-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

• optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
• optoUSB2.0-RBDIR uses a Rosenberger connector which has been proven to be more EMI robust)
• optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)

The optoUSB-2.0-RBDIR system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0. It can be used to transmit USB-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

• optoUSB2.0-RBDIR uses a Rosenberger connector which has been proven to be more EMI robust)
• optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
• optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)