TBMDA1 - 25 MHz - 3 GHz, 9dBm, Modulated Wideband Driver Amplifier

The TBMDA1 modulated wideband driver amplifier is designed in order to create an inexpensive signal source for immunity testing of electronic building blocks and products. It is designed to be driven by the tracking generator output of spectrum analyzers. With its gain of 22 dB and 1dB compression point of +22dBm, it can boost the output power of a tracking generator up to 150mW. 

TBMDA1 Manual

SPECIFICATIONS

TBMDA1 MODULATED WIDEBAND DRIVER AMPLIFIER

The TBMDA1 modulated wideband driver amplifier is designed in order to create an inexpensive signal source for immunity testing of electronic building blocks and products. It is designed to be driven by the tracking generator output of spectrum analyzers. With its gain of 22 dB and 1dB compression point of +22dBm, it can boost the output power of a tracking generator up to 150mW. The TBMDA1 is ideal to drive Tekbox near field probes in order to find the sensitive spot of an electronic circuit or to create electric fields up to 50V/m when driving the Tekbox TEM Cell TBTC1, 25V/m when driving the TBTC2, or 18V/m when driving the TBTC3. Test signals for immunity testing can be CW, AM or PM. Consequently, the TBMDA1 provides built-in modulation capability to generate 1kHz AM or PM signals. In PM mode, the TBMDA1 can also generate a 217Hz Signal with 12.5% duty cycle in order to simulate mobile phone TDMA noise.

FEATURES

  • CW amplifier (modulation off)
  • 1 kHz, 80% AM modulation
  • 1 kHz, 50% duty cycle pulse modulation
  • 217 Hz, 12.5% duty cycle pulse modulation

 

SPECIFICATIONS

Input: 50 Ohm, SMA female
Output: 
50 Ohm, SMA female
Nominal supply Voltage: 
5V, typ. 235mA, Mini-USB-B connector
Maximum supply voltage: 
5.5V
Maximum input power: 
+9dBm
1dB output compression point @ 40MHz: 
+21.5dBm
1dB output compression point @ 2 GHz: 
+22.5dBm
3rd order output intercept point @ 40 MHz: 
+39dBm
3rd order output intercept point @ 2 GHz: 
+42dBm
Reverse isolation S12: 
-45dB
Noise Figure: 
3 … 4 dB
Internal modulation frequency AM: 
1 kHz  ±10%
Internal modulation frequencies PM: 
1 kHz  ±10%, 217 Hz ±20%
Duty cycle, PM: 
50% ±10% @ 1 kHZ; 12.5% ±20% @ 217 Hz

Gain:

25 MHz

50 MHz

100 MHz

500 MHz

1 GHz

1.5 GHz

2 GHz

2.5 GHz

3 GHz

21.6 dB

24.9 dB

25.5 dB

25.6 dB

24.9 dB

24.1 dB

22.2 dB

22.8 dB

25.8 dB

APPLICATION

  • general-purpose gain block
  • signal source for immunity testing, driving near field probes
  • signal source for immunity testing, driving TEM Cells

 

DOCUMENTATION
DOWNLOAD
OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...