KE 2.5-R Tilt Device

The Tilting Device KE 2.5-R is especially designed for radiated measurements on devices under test at horizontal rotation axis. Different types of devices can be mounted onto the tilting plate made of Rohacell - polymethacrylimide (PMI).

Clamping bolts, made of Rohacell, are integrated on the tilting plate which allows the fixing and adjustment of cables.

The Tilting Device, with the exception of the pneumatic rotary actuator, is completely fabricated from plastic, mainly Rohacell, with a very low dielectric constant εr

Polarization occurs using compressed air. A solenoid valve located outside of the chamber regulates the compressed air flow.

The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU 3.0 or NCD Controller.

Technical data:
Height of rotation axis	325 mm (above base plate)
Total height	375 mm
Load capability	max. 2.5 kg
Material tilting plate	Rohacell - polymethacrylimide (PMI)
Dielectric constant at 1 MHz	1.05
Base L x W	0.8 m x 0.4 m
Feed-through in rotation axis for cables	Ø 40 mm
Pneumatic polarization	0° /90° (Horz/Vert)
Polarization time	approx. 3 s
Polarization drive	Pneumatic rotary actuator
Control	Solenoid valve
Material of toothed belts	Kevlar-reinforced (non-metallic)
Voltage	110 VAC - 230 VAC, 50 Hz / 60 Hz single phase
Current consumption	max. 16 A
Required RCD	300 mA
Control cable	Fiber optic lines
Remote control via	LAN (TCP/IP); (IEEE only with NCD)
Interference suppression	20 dB under limits DIN EN 55011:2018-05 class B
Temperature working range	10°C – 35°C
Total weight	approx. 10 kg
Accessories	Service manual 3 m power supply cable 15 m pneumatic air hose 8 mm 1x pneumatic feed through
Controller	FCU3.0 or NCD Controller

Controller Types

LINKs=>	NCD^3.0	FCU^3.0	FCU^3.0S	FCU^3.0S-LITE
Picture
# of Devices	8	4	1	1 (one axis)
Display	5.7" touch	No	No	No
HSU^3.0	Included	Included	Included	Included
Software	mcApp	mcApp	mcApp	mcApp-Lite
Interface	IEEE 488.2, LAN, (option:USB,RS232,..)	LAN	LAN	LAN