CGR 5.4 Cable Guide Rail

The CGR 5.4 cable measuring guide rail, with the exception of the drive unit, is fabricated from plastic (PVC and reinforced fiberglass). Metal parts are located only in the base plate and the drive mechanism (max. 0.3 m above ground level).

The slide rail has adapter plates, which fit all commercially available measuring clamps. The zero point of the measuring length is located 20 mm from the edge of the slide bar (E.U.T.)

The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU 3.0 or NCD Controller.

Technical data:
Moving range	5.4 m (without clamp)
Total measurement length	6.0 m (with clamp)
Overall length	6.2 m
Track height	0.8 m above floor
Material	Plastic and reinforced fiberglass
Base L x W	0.3 m x 0.3 m
Load capacity	15 kg
Cross section	101 mm x 95 mm
Positioning accuracy	+/-0.5°
Motor	DC stepper motor
Support Drive	Toothed belt
Material of toothed belts	Kevlar-reinforced (non-metallic)
Voltage	110 VAC - 230 VAC, 50 Hz / 60 Hz single phase
Current consumption	max. 16 A
Required RCD	300 mA
Control cable	Fiber optic lines
Remote control via	LAN (TCP/IP); (IEEE only with NCD)
Interference suppression	20 dB under limits DIN EN 55011:2018-05 class B
Temperature working range	10°C – 35°C
Total weight	approx. 65 kg
Accessories	Service manual 3 m power supply cable
Controller	FCU3.0 or NCD Controller

Controller Types

LINKs=>	NCD^3.0	FCU^3.0	FCU^3.0S	FCU^3.0S-LITE
Picture
# of Devices	8	4	1	1 (one axis)
Display	5.7" touch	No	No	No
HSU^3.0	Included	Included	Included	Included
Software	mcApp	mcApp	mcApp	mcApp-Lite
Interface	IEEE 488.2, LAN, (option:USB,RS232,..)	LAN	LAN	LAN