PGESD 300K DP - Helicopter 300kV ESD Test System
ONYX VISION 8, 8kV ESD Simulator w/Camera
ONYX VISION 16, 16kV ESD Simulator w/Camera
ONYX VISION 30, 30kV ESD Simulator w/Camera
ESD Test Table Kit
SESD 8800-4: ESD Verification Set
SESD 272 Grounding cable for ESD
SESD 271 Vertical Coupling Plate (VCP) for ESD
SESD 302x Test tip's for ESD
PESD-ECSS-12K, 10kV ESD Pulse Generator to ECSS-E-ST-20-07C
PST-70K, 70kV Precipitation Static Simulator
Products
Absolute EMC, A-ESD Balancer Support Arm
Support arm with balancer for ESD test station
- The only support arm is made from non-metal
- 1.5" Fiberglass Tubes,
- 3D Printed: Cage, holder, base
- Custom ESD simulator adaption
- Balancer is plastic housing and string (only the spring is metallic)
- Only the system meets the metal-free area requirements of standards
- Support arm with the carriage
- 360 degrees pivotable
- Customized attachment to the table included
PGESD 300K DP - Helicopter 300kV ESD Test System
PGESD 300K DP - Helicopter 300kV ESD Test System
- High Voltage Capability: Generates electrostatic discharges up to 300 kV with reversible polarity.
- Adjustable Electrode: Height adjustable from 1.5 to 6 meters and tilt up to ±60° for precise targeting.
- Standards Compliance: Meets MIL-STD-331, MIL-STD-464, NATO AECTP-250, AECTP-500, and more.
- Automated Operation: PC-based software for remote control, calibration, and test reporting.
- Enhanced Safety: Fiber optic interface ensures operator safety by isolating the control system from high-voltage equipment.
- Versatile Testing: Supports multiple discharge scenarios, including personnel-borne and helicopter-borne ESD tests.
- Durable Design: Built for demanding military and industrial testing environments.
ONYX VISION 8, 8kV ESD Simulator w/Camera
An 8 kV ESD simulator for contact and air discharge testing, with a built-in camera and a 3.5-inch color touchscreen. See the discharge point live and save images before and after an impulse to support test documentation.
The portable ESD gun includes a 150 pF / 330 ohm RC network, two rechargeable battery packs and USB-C charging. Increase the voltage capability later with a purchased unlock code for a higher-voltage ONYX VISION configuration.
ONYX VISION 16, 16kV ESD Simulator w/Camera
An 16 kV ESD simulator for contact and air discharge immunity testing. Its integrated 1.5-megapixel camera displays the test point on a 3.5-inch color touchscreen and saves photographs before and after an impulse.
Includes a 150 pF / 330 ohm RC network, two rechargeable batteries and USB-C charging. Upgrade to 30 kV later with a purchased unlock code.
ONYX VISION 30, 30kV ESD Simulator w/Camera
A 30 kV ESD simulator for contact and air discharge immunity testing. Its integrated 1.5-megapixel camera displays the test point on a 3.5-inch color touchscreen and saves photographs before and after an impulse.
Includes a 150 pF / 330 ohm RC network, two rechargeable batteries and USB-C charging. The 30 kV model provides the highest listed family voltage; lower-voltage models can be upgraded with a purchased unlock code.
ESD Test Table Kit
The ESD Test Table Kit is a simple inexpensive solution for your ESD testing. Complies to the requirements of IEC 61000-4-2 and can be used for additional standards. Comes with a Horizontal Coupling Plane (HCP), resistive cable to tie HCP to floor ground plane, bleeder wire for discharging ungrounded battery powered EUTs, 0.05mm insulator and an alternative low impedance ground for using the table for additional setups such as IEC 61000-4-6 requirements.
SESD 8800-4: ESD Verification Set
ESD - Generators verified according to the standard International Electro technical Commission 61000-4-2, ISO 10605 and other. The measurements of the single pulses take place with a special 2 ohm shunt. For the correct verification of the ESD impulses an oscilloscope is necessary with a minimum bandwidth of - 2 GHz acc. IEC 61000-4-2, 2008 and - 1 GHz acc. ISO 10605, 2008. The ESD verification set SESD 8800-4 works up to 4 GHz and fulfilled the request of the double bandwidth regarding to the measurement bandwidth.
SESD 272 Grounding cable for ESD
2m Grounding cable for ESD immunity tests
SESD 271 Vertical Coupling Plate (VCP) for ESD
The Vertical Coupling Plate (VCP) is used in conjunction with ESD generators to simulate indirect discharges on metallic objects that are near a test object. The bleeder resistors contained in the ground wire of the VCP serve to prevent the applied charge from vanishing immediately after the discharge of the ESD generator to the VCP, thereby increasing the effect of the ESD test.
SESD 302x Test tip's for ESD
Avalible ESD Test Tips for replacment or different aplications.
PESD-ECSS-12K, 10kV ESD Pulse Generator to ECSS-E-ST-20-07C
ESD Pulse Generator 10 kV – PESD-ECSS-12K
- High-Voltage Range: 20 V to 10 kV, positive polarity only.
- ECSS Compliant: Meets ECSS-E-ST-20-07C Rev.2 for space-grade ESD tests.
- Damped Oscillatory Waveform: Ensures accurate wire-coupled discharge simulations.
- Remote Control & Monitoring: Offers single shot, repetitive, or remote triggering with RS-232/USB.
- Safety & Reliability: Conforms to EN61010-1 and integrates a 24 Vdc safety loop
PST-70K, 70kV Precipitation Static Simulator
ESD Pulse Generator 10 kV – PESD-ECSS-12K
- High-Voltage Range: 20 V to 10 kV, positive polarity only.
- ECSS Compliant: Meets ECSS-E-ST-20-07C Rev.2 for space-grade ESD tests.
- Damped Oscillatory Waveform: Ensures accurate wire-coupled discharge simulations.
- Remote Control & Monitoring: Offers single shot, repetitive, or remote triggering with RS-232/USB.
- Safety & Reliability: Conforms to EN61010-1 and integrates a 24 Vdc safety loop
