Antenna Mast/Positioner

The ABSOLUTE EMC TP-Cable Support is designed to hold wires, Coax, or waveguide parallel to the ground. This is useful in some cases for test setups where the antenna cable needs to be held back and away from the test area. Or in cases where EUT wires can not bend and need to be held up off the floor. Constructed of PLA plastic, slots for feeding velcro straps or zip-ties, and includes velcro straps to tie down cables or a 1m EPS bar. This rugged cable tray is a good match with the ABSOLUTE EMC Tripod or monopole. 

The ABSOLUTE EMC TP-Item Tray is designed for holding items up. There is often a need to elevate an item at a specific height. Or, in cases where an antenna or transducer does not have ideal mounting, the tray can hold the item with velcro straps or zip ties. Constructed of PLA plastic, slots for feeding velcro straps or zip-ties, and includes velcro straps. This rugged Item tray is a good match with the ABSOLUTE EMC Tripod or monopole. 

The ABSOLUTE EMC MP-Rotator is attached to a 1" Wood Dowel or tube. It holds a second Dowel/tube that can be rotated 360deg to reach out over an obstacle such as a table. This gives the ability to position a camera or other measurement device over top of a test table or in positions where the base/feet of the EMC Monopole/tripod prohibit easy positioning. Constructed of PLA plastic and includes a 36" Hard Wood Dowel. This rugged adaptor is a good match with the ABSOLUTE EMC Tripod or monopole. 

The ABSOLUTE EMC can design and produce Custom Antenna Adaptors. each adaptor is mad for your antennas and tripods or to be used on our Absolute EMC Tripod/monopod stands. Adaptors can be designed to rotate the antenna in the center from horizontal to vertical and position it at the center of gravity of the antenna so it sits easily on the antenna stand. Cost is set based on the size and complexity of the adaptor. 

Pneumatic polarisation shifter with a 2-way pneumatic cylinder for all Schwarzbeck antennas with a 22 mm tube on AM 9144. Compressed air required.

The Antenna Hinge Joint is a device made of high-grade insulating material to change the polarisation of large preferably double-boom antennas such as LOG-PER models.

Positioner for lightweight antennas like SBA 9113 with 420 NJ. The positioner consists of 1 piece of glass fiber tube 22 mm thick, 1000 mm long, an adapter AA 9203 is mounted to the tube. The other end of the tube carries a 3/8 inch male camera thread.

Adapter for Schwarzbeck antennas with 22 mm tube on EMCO mast.

Swivel handle for light antennas

A non-metallic mast adapter for most lightweight Antenna models with 22 mm tube minimizes reflections

• 3/8" camera thread
• polarisation continuously adjustable

Adapter to convert a 3/8" female thread to 22 mm tube e.g. to fix BBHA 9170 on AM 9104.

Antenna adapter to fix STLP 9128 E, STLP 9128 E special, STLP 9128 D, STLP 9128 D special on AM 9144.

• Allows antenna rotation without height adjustment.
• The antenna can be fixed in the center of gravity without any collision
• Adapters with the AM 9144 during polarisation change.