SY 9223 Profibus Balun - Discontinued
Discontinued
120 - 50 ohm conversion
DC - >20 MHz Range
PARTNER:
MARKETS:
CATEGORIES:
TEST STANDARDS:
Data Sheet
SPECIFICATIONS
SY 9223-Profibus BalunDescription The SY 9223 Profibus balun adapts a symmetrical signal to a coaxial line. Usually twisted pairs with an impedance of approx. 120 ? are used to transmit the Profibus signals. The SY 9223 Profibus can be applied to use an existing triaxial wiring.
The symmetrical side has a screw terminal and the unsymmetrical side has a triaxial BNT-jack. The SY 9223 Profibus can be mounted to a DIN 50022 support rail with 35 mm base. Other housings and connectors are available upon request. When needed the outer braid can be connected to ground on pin 2 of the screw terminals.
To transmit video signals using twisted pair cables the balun can be used in the other direction, too.
|
OTHER PRODUCTS IN THE SAME CATEGORY:
AN-ABCD-60, 60 Amp Artificial Network, EV HV Testing
CABCISPR2532A, CISPR 25, 5uH, 32 A LISN
CABCISPR2515A, CISPR 25, 5uH, 15 A LISN
Cx 10000-xxx-xxx, 1000V, 100 - 600 amp 10mF HV Capacitor Cabinet
NSLK 8117, 9 kHz - 30 MHz, 250V / 10A, 50 µH, 2 Path LISN
NNBM 8124, 10 kHz - 150(400) MHz, High Voltage, 70A, single path, 5µH LISN
MDS 21 C, 30 - 1000 MHz, EMI Absorbing Clamp
EMCL 6146, 10 - 1000 MHz, EM Coupling Clamp and CAL EMCL Cal Fixture
FTC 101 B Decoupling Clamp
NTFM 8131 A, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
NNBM DO160-1500, 10 kHz - 400 MHz, 200A, 5µH LISN, DO-160
NNBM 8126 A890, 10 kHz - 400 MHz, 75A, 5µH LISN, DO-160
NNBL 8226-2, 9 kHz - 100 MHz, 70A, 50µH, Two Path LISN
NNBL 8226-HV, 9 kHz - 100 MHz, 70A, 50µH, Single Path LISN
NNBL 8226, 9 kHz - 100 MHz, 70A, 50µH, Single Path LISN
NNBL 8225, 9 kHz - 100 MHz, 20A, 50µH, Single Path LISN
NSLK 8126, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 4 Path LISN
NSLK 8127, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 2 Path LISN
NNBM 8124-800, 0.1 - 150 MHz, High Voltage, 800A, single path, Automotive LISN
