FESP 5133-F, 10 - 200 kHz Circular Screened Coil
- Magnetic field monitoring loop
- 10 - 200 kHz
- Diam. 133mm
- turns 36
- Emissions testing
Data Sheet
SPECIFICATIONS
FESP 5133-F, 10 - 200 kHz Circular Screened CoilThe Loop Sensor FESP 5133-F was designed to monitor the generated magnetic fields in radiated emissions tests (RE01/ RE101). There is nearly no difference to the FESP 5133-7/41, which was originally designed for MIL-STD461E and previous versions, in which the RF-litz wire type AWG 7/41 was specified. Recent versions of MIL-STD461 F and G require a resistance between 5 Ω to 10 Ω for the loop sensor instead. This new requirement was met by the use of a suitable RF-litz wire, which provides resistance of 7.2 Ω for the FESP 5133-F. The Loop Sensor is equipped with plastic spacers, which allow both, a vertical coil placement or a defined spacing of 70 mm to a EuT-surface. The field pickup coil is equipped with an electrostatic shield, which is switchable to ground or floating potential. This switch can be used to detect receiver overload caused by strong stationary or quasi-stationary fields. Specifications:
|
OTHER PRODUCTS IN THE SAME CATEGORY:
Helmholtz Coils Overview
Coil Set 4-39_9k-150k EN 61000-4-39 & RS101 9kHz - 150kHz, Tx & Rx Set
MF EASY, DC-400 kHz, MAGNETIC FIELD EXPOSURE ASSESSMENT SYSTEM
Coil Set 4-39_150k-26M EN 61000-4-39, 150 kHz - 26 MHz, Tx & Rx Set
FMZB 1519 C Active Receiving Loop Antenna
FMZB 1519-60D Active Receiving Loop Antenna
CAB134k Coupling Network for 134kHz
CAB1356m Coupling Network for 13.56 MHz
HFRA 5164, 10 kHz - 120 MHz Transmitting loop antenna
FESP 5139 - DISCONTINUED replaced by HFRA 5164
FESP 5133-9 - 10 kHz - 3 MHz Radiating Loop
FESP 5132 - DC - 150 kHz Radiating Loop
FESP 5133 - DC - 200 kHz Radiating Loop
FESP 5133-1330 - DC - 50 kHz Radiating Loop
FESP 5135 - DC - 300 kHz Radiating Loop
LAS-2000 Loop Antenna Stand
NFCN 1356, 1356 kHz Compensation Network for HFRA 5164
HS 5136 - Hall-Sensor
HFRA SF02G - 0.01 - 30 MHz Transmitting Tunable loop antenna
