optoUSB2.0, Fiber-optic Link for USB
optoUSB2.0 -RBDIR, Fiber-optic Link for USB
opto1394, Fiber-optic Link Firewire/IEEE 1394
optoSPI, Fiber-optic, Automotive Link for SPI Signals
optoSENT, Fiber-optic, Automotive Link for SENT Signals
optoPSI5, Fiber-optic, Automotive Link for PSI5 Signals
optoK, Fiber-optic, Automotive Link for L-Line Signals
optoFlex, Fiber-optic, Automotive Link for Flexray-signals
mk-motion, Motion Detection Software
LSAOL 1.0, Laser Powered RF Link, 9kHz - 6GHz w/5-12VDC 2W power sourse
LSAOL 1.1, Laser Powered RF Link, 9kHz - 6GHz
Products
U1/8, 1 Channel, 50 MHz, Analog Fiber-optic links
These measuring systems are used for the optical, digital transmission of analog signals with a resolution of 8 - 10 Bit and a maximal analog bandwidth of 1 - 50 MHz.
optoUSB2.0, Fiber-optic Link for USB
The optoUSB-2.0 system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0. It can be used to transmit USB-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
- optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
- optoUSB2.0-RBDIR uses a Rosenberger connector which has been proven to be more EMI robust)
- optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)
optoUSB2.0 -RBDIR, Fiber-optic Link for USB
The optoUSB-2.0-RBDIR system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0. It can be used to transmit USB-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
- optoUSB2.0-RBDIR uses a Rosenberger connector which has been proven to be more EMI robust)
- optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
- optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)
opto1394, Fiber-optic Link Firewire/IEEE 1394
opto1394 This system is used for the optical transmission of IEEE1394/Firewire-signals and can transmit data rates of up to 400 Mbit/s (800 Mbit/s at 1394b). The transmitter system consists of two similar transceivers supplied by batteries and a duplex-62,5/125µm-multimode optical cable. Due to its insensitivity against strong electromagnetic fields, the opto1394 is fit for tests of electromagnetic compatibility in EMC-test chambers, TEM-cells, and striplines. The system can also be used for the fail-proof transmission of signals across long distances.
optoSPI, Fiber-optic, Automotive Link for SPI Signals
The optoSPI-HS system can be used for the bidirectional optical transmission of SPI signals with transmission rates of up to 1Mbit/s. It consists of two battery supplied transceivers connected to each other with an optical fiber. With the optical transmission of the shielded case and the external filter, the system is well equipped for EMI and EME tests.
optoSENT, Fiber-optic, Automotive Link for SENT Signals
The optoSENT system was developed for the transmission of asynchronous SENT signals (Single Edge Nibble Transfer) and exists in two different versions.
optoPSI5, Fiber-optic, Automotive Link for PSI5 Signals
The optoSENT system was developed for the transmission of asynchronous SENT signals (Single Edge Nibble Transfer) aThis system is used for the optical transmission of PSI5-signals and allows the transmission in both directions with a sampling rate of 50 MS/s. It consists of a transceiver, supplied by batteries, for the connection of a sensor, a simplex-62,5/125µm-multimode optical cable, and a receiver with internal batteries as well.nd exists in two different versions.
optoK, Fiber-optic, Automotive Link for L-Line Signals
The optoK system can be used for the optical transmission of K-Line signals with transmission rates of more than 30kbit/s at supply voltages of up to 24V. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
optoFlex, Fiber-optic, Automotive Link for Flexray-signals
This system is used for the optical transmission of Flexray-signals and allows the transmission in both directions with a sampling rate of 10 MBit/s. It consists of two identical transceivers, supplied by batteries, and a simplex-62,5/125µm-multimode optical cable (1-fiber-version available on demand).
mk-motion, Motion Detection Software
The Motion Detection Software (mk-motion) analyses video images of a test object to detect deviations between target and actual behaviour. The mk-motion motion detection software is thus an optimal support for your EMC technician in his daily requirements.
LSAOL 1.0, Laser Powered RF Link, 9kHz - 6GHz w/5-12VDC 2W power sourse
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.
- They are ideally suited for EMC emission testing.
- The need for batteries is eliminated through laser-powered operation.
- The LSAOL Front Unit is laser-powered and equipped with both low and high-band pre-amplifiers
- LSAOL 1.0 provides an adjustable, 5 V to 12 V phantom power supply delivering up to 2W to external devices such as active antennas or pre-amplifiers.
LSAOL 1.1, Laser Powered RF Link, 9kHz - 6GHz
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.
- They are ideally suited for EMC emission testing.
- The need for batteries is eliminated through laser-powered operation.
- The LSAOL Front Unit is laser-powered and equipped with both low and high-band pre-amplifiers
- LSAOL 1.0 provides an adjustable, 5 V to 12 V phantom power supply delivering up to 2W to external devices such as active antennas or pre-amplifiers.
