HVTS 30-20 & HVTS 30-40, 30 kV, High Voltage AC Test Set
HVTS 50-10, 50 kV, High Voltage AC Test Set
EMC 2015 Plug in Current/Voltage/Combo wave
PG 6-200 / PG 6-400 Surge Current Generator 5kA, 10kA
PG 6-2402 Surge Current Generator 8/20µs 2x 25kA
PG 4-641, Impulse voltage, 3600 V
PG 10-10000 Surge Current Generator 2x 50kA
PG 12-3600 Surge Current Generator 40kA, Units up to 100kA
PG 20-7000 Surge Current Generator 50kA
PG 20-10000 Surge Current Generator 70kA
PG 20-14000 Surge Current Generator 100kA
Products
PG 20-100 Solar modules test, 20kV
The HV-Pulse generator PG20-100 is used for impulse voltage tests of solar modules (photovoltaic panels) with the standard surge voltage waveform 1.2/50 µs according to IEC 60060-1/2 up to 20 kV acc. to. IEC 61730-1/2 / EN 61730-1.
HVTS 30-20 & HVTS 30-40, 30 kV, High Voltage AC Test Set
The High-Voltage Test-Set HVTS 30-20/ 30-40 is designed for high-voltage testing of the electrical insulation of electrical equipment and electrical systems. Test voltage adjustable up to 30 kV, 1-20 mA/ 1-40mA. The High-Voltage Test-Set HVTS mainly consists of a high-voltage transformer and a control and display unit. The primary voltage of the high-voltage transformer is generated by a motor-driven variac. The output voltage can be selected from 0.2 to 30 kV with a voltage rise adjustable from 0,4 kV/sec to 30 kV/sec.
HVTS 50-10, 50 kV, High Voltage AC Test Set
The High-Voltage Test-Set HVTS 5010 is designed for high-voltage testing of the electrical insulation of electrical equipment and electrical systems. The test voltage is adjustable up to 50 kV, 1 - 10 mA. The High-Voltage Test-Set HVTS 5010 mainly consists of a high-voltage transformer and a control unit. A motor-driven variac generates the primary voltage of the high-voltage transformer. The output voltage can be selected from 2.0 to 50 kV with a voltage rise adjustable from 3 kV/sec to 50 kV/sec. The maximum output current is 10 mA. The output voltage is measured by a built-in capacitive voltage divider.
EMC 2015 Plug in Current/Voltage/Combo wave
The impulse generator system EMC 2015 has been designed for dielectric testing of electric components, over-voltage protectors and electronic circuits acc. IEC, VDE etc. The basic version generates impulse currents with waveform 8/20 µs and a peak value of up to 25 kA. In addition, various other plug-ins are also available.
PG 6-200 / PG 6-400 Surge Current Generator 5kA, 10kA
The high current pulse generators PG 6-400 / PG 6-200 are designed for surge testing of electrical components, over-voltage protectors and electronic circuits acc. to IEC, VDE etc. They generate standard impulse currents with waveform 8/20 µs. Short circuit output current amplitude is selectable from 0.2 up to 10 kA by adjustment of the charging voltage of the internal energy storage capacitor.
PG 6-2402 Surge Current Generator 8/20µs 2x 25kA
The high-current pulse generator PG 6-2402 is designed for surge current testing of electrical components, over-voltage protectors and electronic circuits acc. to IEC, VDE etc. It generates standard impulse currents with waveform 8/20?s. Pulse current output amplitude can be set to 2 - 50 kA.
PG 4-641, Impulse voltage, 3600 V
HV - Impulse generator PG 4-641 creates standard voltage and current pulses with a waveform 10 / 160 µs. The output voltage is adjustable up to 3600 V, the maximum short circuit current amplitude is 480 A peak. Positive or negative polarity of output voltage can be selected. A built-in voltage divider 1000:1 allows monitoring of the impulse output waveform during testing. The short circuit current wave can be monitored by the use of the built-in shunt.
PG 10-10000 Surge Current Generator 2x 50kA
The SURGE TEST GENERATOR PG 10-10000 delivers surge current pulses with the waveform 8/20µs, acc. to IEC 60. It was designed for testing surge protection devices. Moreover, the generator can be used for testing two-gap over-voltage protectors. It delivers surge current pulses synchronous at two impulse current outputs, peak value adjustable 0.5 - 50 kA for each output. Positive or negative polarity of output current can be selected.
PG 12-3600 Surge Current Generator 40kA, Units up to 100kA
The surge current generators generate standard impulse currents with waveform 8/20 µs according to IEC, EN, VDE. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to the maximum value of the special type of generator. The generators are designed for testing electrical components, overvoltage protectors and electronic circuits. They possess an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
PG 20-7000 Surge Current Generator 50kA
The surge current generators PG20-7000 generates standard impulse currents with waveform 8/20 µs according to IEC, EN, VDE. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to 50 kA. The generator is designed for testing electrical components, over-voltage protectors and surge protection devices. The generator possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
PG 20-10000 Surge Current Generator 70kA
The surge current generators PG20-10k generates standard impulse currents with waveform 8/20 µs according to IEC, EN, VDE. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to 70 kA. The generator is designed for testing electrical components, over-voltage protectors and surge protection devices. The generator possesses an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude.
PG 20-14000 Surge Current Generator 100kA
The surge current generators PG20-14000 generate standard impulse currents with waveform 8/20 µs according to IEC, EN, VDE. Pulse current output amplitude is controlled by preset charging voltage and can be adjusted up to 100 kA. The generator is designed for testing electrical components, over-voltage protectors and surge protection devices. The generator possess an electronically regulated high-voltage power supply, which allows an excellent reproducibility of the pulse output amplitude
