CATAGORY

NNHV 8123-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN

NNHV 8123-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN

NNHV 8123, 0.1 - 150 MHz, High Voltage, 70A, single path, Automotive LISN

NNHV 8123, 0.1 - 150 MHz, High Voltage, 70A, single path, Automotive LISN

CMDM 8700 Common mode / Differential mode switch

CMDM 8700 Common mode / Differential mode switch

BAN 8508, BAN 8530, DC-Block 500 for testing to ISO 11452-7 or DC-10614

BAN 8508, BAN 8530, DC-Block 500 for testing to ISO 11452-7 or DC-10614

ISN S1, ISN for Coax Acc CISPR 32

ISN S1, ISN for Coax Acc CISPR 32

ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32

ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32

CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32

CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32

CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32

CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32

CAL CMAD 1614, Calibration fixture for CMAD 1614

CAL CMAD 1614, Calibration fixture for CMAD 1614

CVP 9222 C, 9 kHz - 100 MHz, High Impedance Capacitive Voltage Probe

CVP 9222 C, 9 kHz - 100 MHz, High Impedance Capacitive Voltage Probe

NNBL 8230, 9 kHz - 100 MHz, 300A, 50µH Single Path LISN

NNBL 8230, 9 kHz - 100 MHz, 300A, 50µH Single Path LISN

HVSE 8600, Shielded Enclosure for Automotive LISN

HVSE 8600, Shielded Enclosure for Automotive LISN

Products

NNHV 8123-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN

  • Acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
  • impedance (5µH) || 50 Ohm
  • 200 A, 1000 V (DC)
  • Backside with built-in 0.1 microfarad capacitor to ground
  • N-jack

NNHV 8123, 0.1 - 150 MHz, High Voltage, 70A, single path, Automotive LISN

  • Acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
  • impedance (5µH) || 50 Ohm
  • 70 A, 1000 V (DC)
  • Backside with built-in 0.1 microfarad capacitor to ground
  • N-jack

CMDM 8700 Common mode / Differential mode switch

The measurement mode switch CMDM 8700 expands the measurement possibilities of two V-LISN to T- and Delta-LISNs for the profound analysis of interference emissions.

BAN 8508, BAN 8530, DC-Block 500 for testing to ISO 11452-7 or DC-10614

  • BAN broadband artificial network
  • acc. ISO 11452-7 or DC-10614
  • BAN 8508,  2 A - 8 A
  • BAN 8530,  8 A - 30 A
  • DC-Block 500, DC-blocking capacitor

ISN S1, ISN for Coax Acc CISPR 32

  • ISN acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • Annex D, D9 for coaxial lines

ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32

  • Impedance Stabilisation Network (ISN)
  • acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • CISPR 22, CISPR 32 Annex G.11 and EN 55022 Annex D figure D.11
  • Is capable to provide 1000 MBit/s (Gigabit-Ethernet, 1000BASE-T).

CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32

  • Impedance Stabilisation Network (ISN)
  • acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • Unshielded twisted pairs (UTP) or communication ports 
  • With 2, 4, 6, or 8 wires

CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32

  • Impedance Stabilisation Network (ISN)
  • acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • Unshielded twisted pairs (UTP) or communication ports 
  • With 2, 4, 6, or 8 wires

CAL CMAD 1614, Calibration fixture for CMAD 1614

  • Calibration fixture for Common-Mode Absorbing Clamp
  • (10) 30 - 200 (1000)MHz

CVP 9222 C, 9 kHz - 100 MHz, High Impedance Capacitive Voltage Probe

  • Calibration fixture for Common-Mode Absorbing Clamp
  • (10) 30 - 200 (1000)MHz

NNBL 8230, 9 kHz - 100 MHz, 300A, 50µH Single Path LISN

  • Measurement of interference for MIL-STD-461/462
  • 9 kHz - 100 MHz
  • 250VDC / 250VAC 50/60Hz / 140VAC 400Hz
  • Max current 300A, (500A limited time)
  • Impedance of each path: 50 µH +5 Ω || 50 Ω ±20 %

HVSE 8600, Shielded Enclosure for Automotive LISN

  • Shield Box for LISN
  • Measurements of electric- or hybrid vehicles
  • Aluminum 
  • Shielding Effectiveness: typ. > 100 dB
  • CISPR 25 Ed. 4, BMW GS 95025-1

Loading...