NNBL 8226, 9 kHz - 100 MHz, 70A, 50µH, Single Path LISN
NNBL 8225, 9 kHz - 100 MHz, 20A, 50µH, Single Path LISN
NSLK 8127, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 2 Path LISN
NSLK 8126, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 4 Path LISN
NTFM 8131 A, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
FTC 101 B Decoupling Clamp
EMCL 6146, 10 - 1000 MHz, EM Coupling Clamp and CAL EMCL Cal Fixture
NNBM 8124-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN
CDNE M3, 3 lines, Coupling & Decoupling Network, CISPR 15
MDS 21 C, 30 - 1000 MHz, EMI Absorbing Clamp
NNBM 8124-800, 0.1 - 150 MHz, High Voltage, 800A, single path, Automotive LISN
Products
NNBL 8226-HV, 9 kHz - 100 MHz, 70A, 50µH, Single Path LISN
- Measurement of interference for MIL-STD-461/462
- 9 kHz - 100 MHz
- 800VDC / 800VAC 50/60Hz / 140VAC 400Hz
- Max current 70A (100A Short time)
- Impedance of each path: 50 µH +5 Ω || 50 Ω ±20 %
NNBL 8226, 9 kHz - 100 MHz, 70A, 50µH, Single Path LISN
- Measurement of interference for MIL-STD-461/462
- 9 kHz - 100 MHz
- 250VDC / 250VAC 50/60Hz / 140VAC 400Hz
- Max current 70A (100A Short time)
- Impedance of each path: 50 µH +5 Ω || 50 Ω ±20 %
NNBL 8225, 9 kHz - 100 MHz, 20A, 50µH, Single Path LISN
- Measurement of interference for MIL-STD-461/462
- 9 kHz - 100 MHz
- 250VDC / 250VAC 50/60Hz / 140VAC 400Hz
- Max current 20A
- Impedance of each path: 50 µH +5 Ω || 50 Ω ±20 %
NSLK 8127, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 2 Path LISN
- 2 path LISN (Single-Phase)
- Line Impedance Stabilisation Network
- Connector: CEE 7/4
- 9 kHz to 30 MHz
- 250 VAC, 400 VDC, 16 A
- (50 µH+5 Ω) || 50 Ω
- CISPR 16-1-2
NSLK 8126, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 4 Path LISN
- High Current 4 path LISN (3-Phase & Single-Phase)
- Line Impedance Stabilisation Network
- Connector: CEE plug (IEC 60309) & CEE 7/4
- 9 kHz to 30 MHz
- 250/400 VAC, 400 VDC, 16 A (16A for CEE 7/4)
- (50 µH+5 Ω) || 50 Ω
- CISPR 16-1-2
NTFM 8131 A, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
- T-ISN 150 Ohm asymmetric
- BNC-jack 50 Ohm unsymmetric
- 2-wire
- 400 V, 3 A AC
- 9 kHz - 30 MHz
- EN55015-2002, CISPR 32, CISPR 15, CISPR 16-1-2
FTC 101 B Decoupling Clamp
- Companion to EMCL 6146
- Usable frequency range: 10kHz - 1000MHz
- Meets EN / IEC 61000-4-6
- Cable bundles maximum diameter of 25 mm
EMCL 6146, 10 - 1000 MHz, EM Coupling Clamp and CAL EMCL Cal Fixture
- Common-Mode Absorbing Clamp
- Usable frequency range: 10kHz - 1000MHz
- Meets EN / IEC 61000-4-6
- Cable bundles maximum diameter of 25 mm
- Optional Cal Fixture: CAL EMCL
NNBM 8124-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN
- Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, or ISO 7637-2
- impedance (5µH + 1 Ohm) || 50 Ohm
- 200 A, 1000 V (DC)
- Switchable 50Ohm Load on measurement port
- 1 microfarad capacitor to ground on AE side
- BNC-jack (Type N option)
CDNE M3, 3 lines, Coupling & Decoupling Network, CISPR 15
- for testing 3 line mains (with PE)
- CISPR 15, EN 55015
- 30 MHz - 300 MHz
MDS 21 C, 30 - 1000 MHz, EMI Absorbing Clamp
- EMI Absorbing Clamp
- 30 - 1000 MHz
- acc. CISPR 16 for interference power with silicon-coated rolls
- Also for shielding measurements on coax. cables
NNBM 8124-800, 0.1 - 150 MHz, High Voltage, 800A, single path, Automotive LISN
- Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, or ISO 7637-2
- impedance (5µH + 1 Ohm) || 50 Ohm
- 800 A, 1000 V (DC)
- Switchable 50Ohm Load on measurement port
- 1 microfarad capacitor to ground on AE side
- BNC-jack (Type N option)
