The TBATTs are DC - 3GHz attenuators available with 3 - 30dB attenuation in 10-100W versions. N male to N female connections.
TBTER-50 Ohm RF Terminations from 0.5W to 25W
BCI-P1 Bulk Current Injection Probe 10 kHz – 400 MHz - Meets specifications of ISO 11452-4:2005 and IEC 61000-4-6 - Frequency range from 1 MHz up to 400 MHz - Designed for automotive BCI testing - Low insertion loss (1MHz - 400MHz) to test bellow 1MHz (IEC/DO/MIL) see CDN BCI-P1_MT-1
CDN BCI-P1_MT-1 Bulk Current Injection Probe 4 kHz – 400 MHz - Meets specifications of ISO 11452-4:2005, MIL-STD-461, DO-160 and IEC 61000-4-6 - Frequency range from 4 kHz up to 400 MHz - Designed for BCI testing
The Tekbox EMC compliance software EMCview for PCs is a user friendly EMC pre-compliance testing of radiated and conducted emissions. It is a perfect complement for automated testing using our LISNs and TEM Cells. A built in amplitude correction enables correction and conversion coefficients for cables, amplifiers, attenuators, LISNs, TEM cells, antennas, RF current probes, striplines and capacitive coupling clamps.
The TBOH02 is a self-powered, precision active load. It does not need a separate supply voltage and operates as low as 2V. Its features include constant resistance and constant current mode. A 10 turn potentiometer with dial, a range switch and a precision reference enable the accurate setting of current or resistance. Furthermore, it can be controlled by an external voltage.
The TBSB line of shielded bags is designed to suppress interference from ambient noise when carrying out EMC pre-compliance measurements. The shielded bags are a low cost alternative to shielded tents for test equipment such as LISNs or TEM-cells. The shielded bags are composed of two layers of conductive fabrics. The access opening is sealed with conductive Velcro tape. Suggestions on how to feed cables into the bags are given in the application section of this manual.
Many EMC pre-compliance test setups require a ground plane. Not every lab has the necessary space for the permanent installation of a sheet metal ground plane.
Compleat your pre-compliance setup with premade coax cables.
The TBCH1 and TBCH2 wall mount cable holders are efficient and neat solutions to store laboratory cables. The TBCH1 cable holder is designed with a focus on storing RF cables and oscilloscope probes. The TBCH2 is ideal for banana cables.
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.