EMCL- NW 10 / MN-1 EM Clamp Matching Network
TBCG2 Comb Generator/Frequency Multiplier
TBCG3-RN2 Comb Generator, 5 kHz-2 GHz, for RE
FSHPE, 9 kHz - 300 MHz, Single Axis E-Field Antenna
FSHPH, 9 kHz - 300 MHz, Single Axis H-Field Antenna
TBCG3-RN6 Comb Generator, 5 kHz-6 GHz, for RE
TBCCP1-400K600 COAXIAL RF CURRENT MONITORING PROBE
Probe Stand
CISPR 17 Equipment
BN 1701, Buffer network
IGUU 2918, Calibration-Pulse Generator for CISPR 16 Receivers
Products
CDN ABCL-20 Decoupling Clamp
CDN ABCL-20 Decoupling Clamp for immunity according to IEC / EN 61000-4-6 Ed. 4.0 100 kHz – 1000 MHz Features: For additional decoupling at immunity testing according to IEC / EN 61000-4-6 Suitable for cables up to 20mm diameter
EMCL- NW 10 / MN-1 EM Clamp Matching Network
EMCL- NW 10 / MN-1 Matching Network • For use with the EMCL-20 in the frequency range 10 kHz – 150 kHz • For use with the CDN BCI-P1 in the frequency range 10 kHz – 150 kHz
TBCG2 Comb Generator/Frequency Multiplier
The TBCG2 is a passive, step recovery diode based comb generator/frequency multiplier. It is optimized for moderate drive power and spectrum flatness in the frequency range 1 MHz to 2.5GHz. The recommended drive power is +10 dBm to +20 dBm The frequency range for the drive signal is 1 MHz to 350MHz
TBCG3-RN2 Comb Generator, 5 kHz-2 GHz, for RE
The TBCG3-RN2 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.
- 5 kHz-2 GHz,
- switchable 5, 10, 25, 50, 100 MHz,
- external: 5 kHz-200 MHz,
- 6xNiMH, AA, Charger,
- 2 monopole antennas
FSHPE, 9 kHz - 300 MHz, Single Axis E-Field Antenna
E-field, 9 kHz - 300 MHz, probe for handheld spectrum analyzer of all main manufacturers.
Usable with the following devices:
- Rohde und Schwarz FSH-Serie
- Agilent Fieldfox
- Anritsu Sitemaster, LMR-Master, Spectrum Master
- Aeroflex 9100 Handheld Spectrum Analyzer Series
- and many more...
FSHPH, 9 kHz - 300 MHz, Single Axis H-Field Antenna
H-field, 9 kHz - 300 MHz, probe for handheld spectrum analyzer of all main manufacturers.
Usable with the following devices:
- Rohde und Schwarz FSH-Serie
- Agilent Fieldfox
- Anritsu Sitemaster, LMR-Master, Spectrum Master
- Aeroflex 9100 Handheld Spectrum Analyzer Series
- and many more...
TBCG3-RN6 Comb Generator, 5 kHz-6 GHz, for RE
The TBCG3-RN6 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.
- 5 kHz-6 GHz,
- switchable 5, 10, 25, 50, 100 MHz,
- external: 5 kHz-200 MHz,
- 6xNiMH, AA, Charger,
- 2 monopole antennas
TBCCP1-400K600 COAXIAL RF CURRENT MONITORING PROBE
The TBCCP1-400K600 is a coaxial RF current monitoring probe with a 3 dB bandwidth from 400 kHz to 600 MHz and a very flat response from 1 MHz to 200 MHz.
Probe Stand
Our custom-designed probe stand is ideal for mounting radiated immunity probes, sound probes, and small cameras.
CISPR 17 Equipment
Transformers
fixtures and adapters to measure filters
ferrites and other passive components.
Detailed product list and data sheets on request.
IGUU 2918, Calibration-Pulse Generator for CISPR 16 Receivers
- Calibration-Pulse Generator acc. CISPR 16
- For Band A, B, C, D (9 kHz-1000 MHz)
- To calibrate the pulse response of the EMI receiver
- Pulse repetition frequency main generator 0.1 - 200 Hz (aux. generator up to 1 MHz) with IEEE-488 Interface.
