Products
BV-24S EMC Hardened Power Supply +24V
This system is used for the power supply of mobile devices with an unregulated voltage of 24V. It has integrated batteries which are directly connected to the output.
optoA2B, Fiber-optic, Automotive Link for A2B Signals
TheoptoA2B can be used for the optical transmission of A2B signals. It consists of master and slave which are supplied by internal batteries and which are connected with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
optoRS422, Fiber-optic Link for RS422 signals
The optoRS422 system can be used for the optical transmission of RS422-signals up to a data rate of 1 Mbit/s. It can be used to transmit RS422-signals over long distances or to handle potential ground problems. With the optical transmission and the shielded case, the system is well-equipped for EMI and EME tests.
optoUSB3.0, Fiber-optic Link for USB 3.0
The optoUSB-3.0 system can be used for the optical transmission of USB signals up to a data rate of 5Gbit/s according to the USB3.0 standard. It can be used to transmit USB signals over long distances (up to 50m) or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
- optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)
- optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
- optoUSB2.0-RBDIR uses a Rosenberger connector which has been proven to be more EMI robust)
optoTTL 12-5-u, Fiber-optic Link for 5V & 12V TTL signals
The optoTTL 12-5-u is used for the optical transmission of 12-volt and 5-volt TTL (Transistor-Transistor Logic) digital signals. Up to 16 digital signals with a sampling rate of 40 MS/s (each channel) can be transmitted. The system consists of a transmitter supplied by batteries, a simplex-62,5/125µm-multimode optical cable, and a receiver – which has integrated batteries as well.
