Absolute EMC Tripod
EMC PLA Block Lab kits, 10 x 10 x 5 cm
EMC EPS Block - 10 x 10 x 5 cm, EUT support
EMC EPS 70x150cm Support- EUT support
CABFPS, Field Sensor Probe Stand
ABSOLUTE EMC TP-Ball Head For Tripod or Monopole
ABSOLUTE EMC TP-Cable Support For Tripod or Monopole
ABSOLUTE EMC TP-Item Tray For Tripod or Monopole
ABSOLUTE EMC MP-Rotator For Tripod or Monopole
ABSOLUTE EMC Custom Antenna Adaptors For Tripod or Monopole
Products
Absolute EMC Monopole Antenna Stand
The original ABSOLUTE EMC Monopole is specifically designed for the EMC market as a low-cost, easy-to-use solution with no metallic parts except for the antenna connection screw. It's easy to assemble and fully adjustable in height using the center mast section. Made from low permittivity materials, it's ideal for various EMC applications like holding antennas, cameras, RF field probes, and keeping cables off the floor. The monopole's compact design allows for easy maneuverability and reduces tripping hazards compared to tripods. Plus, any plastic pieces that break will be replaced free of charge for the life of the product.
Absolute EMC Tripod
- Non-Metallic Design: All parts are non-metallic except the antenna connection screw, ensuring minimal interference in EMC testing.
- 3D-Printed PLA & Hardwood Construction: Includes 1" hardwood dowels that are adjustable up to 3 feet; fiberglass dowels are also available.
- Height Adjustability: Ranges from 37" to 68" using a 1-inch center mast.
- Stability: Comes with leveling feet and an optional weight ballast to ensure stability.
EMC PLA Block Lab kits, 10 x 10 x 5 cm
The original EMC PLA blocks are 3D printed with PLA plastic. They are extremely durable and versatile for the EMC environment. They come in dimensional metric sizes of 10 x 10 x 5 cm. Keep your test setup looking professional with this lightweight and EUT support. The surface is easily wiped clean for continued years of everyday use. Ideal for use in EMC testing for EUT and cable supports. The EMC PLA Blocks are crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on 6 sides and allows for stacking and locking together. They are conveniently sold in kits in tote bins for secure storage. Each block has features for looping rubber bands, zip ties, or velcro straps. these features can be used to lock blocks together or to hold EUT/DUT wiring down to the blocks.
EMC EPS Block - 10 x 10 x 5 cm, EUT support
The original EMC EPS Block is white Expanded Polystyrene can optional be covered in a vinyl covering on top and sides or with a painted coating to extend durability. They come in dimensional metric sizes of 10 x 10 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Block is crush resistance able to withstand heavy weight loads without deforming. 1cm marking on 6 sides allows for easy positioning and test setups. They are conveniently sold in kits in tote bins for secure storage.
EMC EPS 70x150cm Support- EUT support
The original EMC EPS 70x150cm Support is white Expanded Polystyrene (EPS)
- 150 x 100 x 70 cm.
- Sit on top of a standard 80cm test table for a 150cm height
- < 1.04 Permittivity
- A new design can be pre-built or shipped flat, self-assembled, glued onsite
CABFPS, Field Sensor Probe Stand
The Conformity Assessment Business Field Sensor Probe Stand is designed for accurate placement of the field probe when carrying out testing to MIL STD 461, RTCA DO160, DEF STAN 59-411 and EN61000-4-3 (Where field monitoring is required)
ABSOLUTE EMC TP-Ball Head For Tripod or Monopole
The ABSOLUTE EMC TP-Ball Head is designed to mount a camera or other lightweight item with complete position control. Constructed of PLA plastic, only the 1/4"-20 screw is metal. This rugged adaptor is a good match with the ABSOLUTE EMC Tripod or monopole.
ABSOLUTE EMC TP-Cable Support For Tripod or Monopole
The ABSOLUTE EMC TP-Cable Support is designed to hold wires, Coax, or waveguide parallel to the ground. This is useful in some cases for test setups where the antenna cable needs to be held back and away from the test area. Or in cases where EUT wires can not bend and need to be held up off the floor. Constructed of PLA plastic, slots for feeding velcro straps or zip-ties, and includes velcro straps to tie down cables or a 1m EPS bar. This rugged cable tray is a good match with the ABSOLUTE EMC Tripod or monopole.
ABSOLUTE EMC TP-Item Tray For Tripod or Monopole
The ABSOLUTE EMC TP-Item Tray is designed for holding items up. There is often a need to elevate an item at a specific height. Or, in cases where an antenna or transducer does not have ideal mounting, the tray can hold the item with velcro straps or zip ties. Constructed of PLA plastic, slots for feeding velcro straps or zip-ties, and includes velcro straps. This rugged Item tray is a good match with the ABSOLUTE EMC Tripod or monopole.
ABSOLUTE EMC MP-Rotator For Tripod or Monopole
The ABSOLUTE EMC MP-Rotator is attached to a 1" Wood Dowel or tube. It holds a second Dowel/tube that can be rotated 360deg to reach out over an obstacle such as a table. This gives the ability to position a camera or other measurement device over top of a test table or in positions where the base/feet of the EMC Monopole/tripod prohibit easy positioning. Constructed of PLA plastic and includes a 36" Hard Wood Dowel. This rugged adaptor is a good match with the ABSOLUTE EMC Tripod or monopole.
ABSOLUTE EMC Custom Antenna Adaptors For Tripod or Monopole
The ABSOLUTE EMC can design and produce Custom Antenna Adaptors. each adaptor is mad for your antennas and tripods or to be used on our Absolute EMC Tripod/monopod stands. Adaptors can be designed to rotate the antenna in the center from horizontal to vertical and position it at the center of gravity of the antenna so it sits easily on the antenna stand. Cost is set based on the size and complexity of the adaptor.
