ABSOLUTE EMC TP-Item Tray For Tripod or Monopole
ABSOLUTE EMC MP-Rotator For Tripod or Monopole
ABSOLUTE EMC Custom Antenna Adaptors For Tripod or Monopole
CAM 6.0-P 12kg Compact Antenna Mast, 6m
AM 4.0 Antenna Mast, 4m
AM 4.0-O Antenna Mast, OATS, 4m
AM 6.0 Antenna Mast, 6m
BAM 4.0-P Boresight Antenna Mast, 4m
BAM 4.5-P Boresight Antenna Mast, 4.5m
DAM 6.0-O Dual Antenna Mast
DAM 4.0-E Dual Antenna Mast
Products
ABSOLUTE EMC TP-Cable Support For Tripod or Monopole
The ABSOLUTE EMC TP-Cable Support is designed to hold wires, Coax, or waveguide parallel to the ground. This is useful in some cases for test setups where the antenna cable needs to be held back and away from the test area. Or in cases where EUT wires can not bend and need to be held up off the floor. Constructed of PLA plastic, slots for feeding velcro straps or zip-ties, and includes velcro straps to tie down cables or a 1m EPS bar. This rugged cable tray is a good match with the ABSOLUTE EMC Tripod or monopole.
ABSOLUTE EMC TP-Item Tray For Tripod or Monopole
The ABSOLUTE EMC TP-Item Tray is designed for holding items up. There is often a need to elevate an item at a specific height. Or, in cases where an antenna or transducer does not have ideal mounting, the tray can hold the item with velcro straps or zip ties. Constructed of PLA plastic, slots for feeding velcro straps or zip-ties, and includes velcro straps. This rugged Item tray is a good match with the ABSOLUTE EMC Tripod or monopole.
ABSOLUTE EMC MP-Rotator For Tripod or Monopole
The ABSOLUTE EMC MP-Rotator is attached to a 1" Wood Dowel or tube. It holds a second Dowel/tube that can be rotated 360deg to reach out over an obstacle such as a table. This gives the ability to position a camera or other measurement device over top of a test table or in positions where the base/feet of the EMC Monopole/tripod prohibit easy positioning. Constructed of PLA plastic and includes a 36" Hard Wood Dowel. This rugged adaptor is a good match with the ABSOLUTE EMC Tripod or monopole.
ABSOLUTE EMC Custom Antenna Adaptors For Tripod or Monopole
The ABSOLUTE EMC can design and produce Custom Antenna Adaptors. each adaptor is mad for your antennas and tripods or to be used on our Absolute EMC Tripod/monopod stands. Adaptors can be designed to rotate the antenna in the center from horizontal to vertical and position it at the center of gravity of the antenna so it sits easily on the antenna stand. Cost is set based on the size and complexity of the adaptor.
CAM 6.0-P 12kg Compact Antenna Mast, 6m
The Compact Antenna Mast CAM 6.0-P 12kg
- Height range 1.0 - 6.0 m
- Pneumatic polarization change 90°
- Electric stepper motor height
- Antenna Load: 12 kg (when balanced)
AM 4.0 Antenna Mast, 4m
The Antenna Mast AM 4.0
- Height range 1.0 - 4.0 m
- Electric polarization change 90°
- Electric stepper motor height
- Antenna Load: 10 kg (when balanced)
AM 4.0-O Antenna Mast, OATS, 4m
The Antenna Mast AM 4.0-0
- Height range 1.0 - 4.0 m
- Designed for easy use outside on OATS
- Electric polarization change 90°
- Electric stepper motor height
- Antenna Load: 10 kg (when balanced)
AM 6.0 Antenna Mast, 6m
The Antenna Mast AM 6.0
- Height range 1.0 - 6.0 m
- Electric polarization change 90°
- Electric stepper motor height
- Antenna Load: 10 kg (when balanced)
BAM 4.0-P Boresight Antenna Mast, 4m
The Boresight Antenna Mast BAM 4.0-P
- Boresite -18.5° to +45°
- Height range 1.0 - 4.0m
- Pneumatic polarization change 90°
- Electric stepper motor height
BAM 4.5-P Boresight Antenna Mast, 4.5m
The Boresight Antenna Mast BAM 4.5-P
- Boresite -18.5° to +45°
- Height range 1.0 - 4.5m
- Pneumatic polarization change 90°
- Electric stepper motor height
DAM 6.0-O Dual Antenna Mast
The Antenna Mast AM 6.0
- Height range 1.0 - 6.0 m
- Electric polarization change 90°
- Electric stepper motor height
- Antenna Load: 20 kg (when balanced)
DAM 4.0-E Dual Antenna Mast
The Dual Antenna Mast DAM 4.0-E
- Height range 1.0 - 4.0m
- Electric polarization change 90°
- Electric stepper motor height
- 20 kg Load capacity (when balanced)
