CMDM 8700 Common mode / Differential mode switch
BAN 8508, BAN 8530, DC-Block 500 for testing to ISO 11452-7 or DC-10614
HVSE 8600, Shielded Enclosure for Automotive LISN
HVSE 8601, 800A Shielded Enclosure for Automotive LISN
CAP 0.9-400, 0.9 µF capacitor for NNHV 8123-400/-800
VTSD 9561 F, 10dB, Diode Pulse Limiter
VTSD 9561 D, 20dB, Diode Pulse Limiter
Products
NNHV 8123, 0.1 - 150 MHz, High Voltage, 70A, single path, Automotive LISN
- Acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
- impedance (5µH) || 50 Ohm
- 70 A, 1000 V (DC)
- Backside with built-in 0.1 microfarad capacitor to ground
- N-jack
CMDM 8700 Common mode / Differential mode switch
The measurement mode switch CMDM 8700 expands the measurement possibilities of two V-LISN to T- and Delta-LISNs for the profound analysis of interference emissions.
BAN 8508, BAN 8530, DC-Block 500 for testing to ISO 11452-7 or DC-10614
- BAN broadband artificial network
- acc. ISO 11452-7 or DC-10614
- BAN 8508, 2 A - 8 A
- BAN 8530, 8 A - 30 A
- DC-Block 500, DC-blocking capacitor
HVSE 8600, Shielded Enclosure for Automotive LISN
- Shield Box for LISN
- Measurements of electric- or hybrid vehicles
- Aluminum
- Shielding Effectiveness: typ. > 100 dB
- CISPR 25 Ed. 4, BMW GS 95025-1
HVSE 8601, 800A Shielded Enclosure for Automotive LISN
- Shield Box for 800A, LISN
- Measurements of electric- or hybrid vehicles
- Aluminum
- Shielding Effectiveness: typ. > 100 dB
- CISPR 25 Ed. 4, BMW GS 95025-1
CAP 0.9-400, 0.9 µF capacitor for NNHV 8123-400/-800
In order to be compliant to the standards ECE R10.06, CISPR 12 and PSA (which require a capacitance of in total 1 uF parallel to a resistance of 1 MΩ at the input side of the LISN) a 0.9 μF capacitor like the CAP 0.9-400 has to be connected to the mains terminals of the NNHV 8123-400 or NNHV 8123-800 LISN.
VTSD 9561 F, 10dB, Diode Pulse Limiter
Diode Pulse Limiter with built-in 10 dB high power attenuator and fuse lamp to protect sensitive measuring equipment when measuring spectra with high energy. Thanks to the built-in fuse lamp, serious overload situations of sensitive equipment can be recognized fast and reliably. A replacement bulb is placed inside the unit. The pulse limiter prevents expensive equipment defects. The very flat frequency response allows high measurement accuracy, even if only a few sample values are used for correction.
VTSD 9561 D, 20dB, Diode Pulse Limiter
Diode Pulse Limiter with built-in 20 dB high power attenuator and fuse lamp to protect sensitive measuring equipment when measuring spectra with high energy. Thanks to the built-in fuse lamp, serious overload situations of sensitive equipment can be recognized fast and reliably. A replacement bulb is placed inside the unit. The pulse limiter prevents expensive equipment defects. The very flat frequency response allows high measurement accuracy, even if only a few sample values are used for correction.
