Absolute EMC Tripod
Absolute EMC Monopole Antenna Stand
EMC EPS Bar- 1m long 5cm height, EUT/cable support
EMC EPS 70cm Support- EUT support
EMC EPS Cube- 10x10x10 cm, EUT support
EMC001340SE , 10 kHz - 3 GHz, 40dB gain, Portable Low Noise Preamplifier
EMC330NSE, 20MHz - 3 GHz, 30dB gain, Portable Low Noise Preamplifier
EMC03640, 30 MHz - 6 GHz, 40dB gain, Low Noise Preamplifier
RefRad X Comb Generator 10 kHz - 3 GHz
Site Validation - Seibersdorf is the specialist
CG 50/500, 50 kHz - 30 MHz, 50 and 500 kHz Steps, Conducted Comb Generator
Products
EMC PLA Block Lab kits, 10 x 10 x 5 cm
The original EMC PLA blocks are 3D printed with PLA plastic. They are extremely durable and versatile for the EMC environment. They come in dimensional metric sizes of 10 x 10 x 5 cm. Keep your test setup looking professional with this lightweight and EUT support. The surface is easily wiped clean for continued years of everyday use. Ideal for use in EMC testing for EUT and cable supports. The EMC PLA Blocks are crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on 6 sides and allows for stacking and locking together. They are conveniently sold in kits in tote bins for secure storage. Each block has features for looping rubber bands, zip ties, or velcro straps. these features can be used to lock blocks together or to hold EUT/DUT wiring down to the blocks.
Absolute EMC Tripod
The original ABSOLUTE EMC Tripod is explicitly designed for the EMC market. A low-cost and easy-to-use tripod with no metallic parts with the exception of the antenna connection screw. The EMC Tripod is easy to assemble, take apart, and store. It is fully adjustable in height with the center mast section. Materials used are low permittivity allowing for use in most EMC applications to hold antennas, cameras, RF field probes, cables off the floor, and other support possibilities. If any plastic pieces break, they will be replaced free of charge for the product's life.
Absolute EMC Monopole Antenna Stand
The original ABSOLUTE EMC Monopole is explicitly designed for the EMC market. A low-cost and easy-to-use monopole with no metallic parts, with the exception of the antenna connection screw. The EMC Monopole is easy to assemble. It is fully adjustable in height with the center mast section. Materials used are low permittivity allowing for use in most EMC applications to hold antennas, cameras, RF field probes, cables off the floor, and other support possibilities. The monopole design allows for a small footprint for easy maneuvering around and reduces tripping caused by tripods. If any plastic pieces break, they will be replaced free of charge for the product's life.
EMC EPS Bar- 1m long 5cm height, EUT/cable support
The original EMC EPS Bar is white Expanded Polystyrene can optional be painted coating to extend durability. They come in dimensional metric sizes of 100 x 8.5 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Bar is crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on 4 sides allows for easy positioning and test setups.
EMC EPS 70cm Support- EUT support
The original EMC EPS 70cm Support is white Expanded Polystyrene. They come in dimensional metric sizes of 40 x 60 x 70 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. Since the EMC EPS 70cm Support is made from a denser EPS rating, it is crush resistance and able to withstand heavy weight loads without deforming.
EMC EPS Cube- 10x10x10 cm, EUT support
The original EMC EPS Cube is white Expanded Polystyrene can optional a painted coating to extend durability. They come in dimensional metric sizes of 10 x 10 x 10 cm which matches EUT height requirements for IEC testing above the ground plane for IEC 61000-4-5 and IEC 61000-4-6. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Cube is crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on all 6 sides allows for easy positioning and test setups. They are conveniently sold in kits in tote bins for secure storage.
EMC001340SE , 10 kHz - 3 GHz, 40dB gain, Portable Low Noise Preamplifier
- 10 kHz - 3 GHz, 40dB Gain, 5dB N.F.
- Compensation long cable loss for EMI Measurement
- Improve system noise floor flatness
- High EMI performance
- High linearity LNA for EMI measurement
- High dynamic range
- Unconditionally Stable
- State-of-the-Art Technology
EMC330NSE, 20MHz - 3 GHz, 30dB gain, Portable Low Noise Preamplifier
- 20 MHz - 3 GHz, 30dB Gain, 5dB N.F.
- Compensation long cable loss for EMI Measurement
- Improve system noise floor flatness
- High EMI performance
- High linearity LNA for EMI measurement
- High dynamic range
- Unconditionally Stable
- State-of-the-Art Technology
EMC03640, 30 MHz - 6 GHz, 40dB gain, Low Noise Preamplifier
- 30 MHz - 6 GHz, 40dB Gain, 2.5dB N.F.
- Compensation long cable loss for EMI Measurement
- Improve system noise floor flatness
- High EMI performance
- High linearity LNA for EMI measurement
- High dynamic range
- Unconditionally Stable
- State-of-the-Art Technology
RefRad X Comb Generator 10 kHz - 3 GHz
RefRad X Comb Generator The newly developed battery-operated comb generator RefRad X is specially designed for checking the quality of radiated and conducted EMC and EMF tests. Initially introduced at the beginning of 2008, several modifications in the print design have enhanced the RefRad X considerably.
Site Validation - Seibersdorf is the specialist
The testing and performance evaluation of EMC test sites requires precision field-strength measurements. Seibersdorf is the European market leader in this business. We offer these measurements as an accredited laboratory. Since 1997 we are also present in the Asian market. Due to intensive investigation in this field during recent years many results have been adopted in international standards (e.g. CISPR 16 series).
CG 50/500, 50 kHz - 30 MHz, 50 and 500 kHz Steps, Conducted Comb Generator
- Frequency Range: 50 kHz - 30 MHz
- Frequency step: 50 kHz or 500 kHz switchable
- IEC320 C14, RJ11, RJ45
- Includes: Generator, charger, wood case
