DYN 4WD - I Dynamometer Integrated into TT 7.5-5t-DYN Turntable
The turntable TT 3.0-3t is especially designed for flush mounted installation in semi anechoic electromagnetic absorption chambers. The carrier plate is made of stainless steel. It is 3.0m in diameter and has a 3000kg load capacity.
A 285 mm diameter opening in the turntable's center allows the insertion of a power supply for testing.
The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU 3.0 or NCD Controller.
Other diameters and load capabilities are available on request.
The turntable TT 4.0-4t is especially designed for flush mounted installation in semi anechoic electromagnetic absorption chambers. The carrier plate is made of stainless steel. It is 4.0m in diameter and has a 4000kg load capacity.
A 285 mm diameter opening in the turntable's center allows the insertion of a power supply for testing.
The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU 3.0 or NCD Controller.
Other diameters and load capabilities are available on request.
The turntable TT 5.0-5t is especially designed for flush mounted installation in semi anechoic electromagnetic absorption chambers. The carrier plate is made of stainless steel. It is 5.0m in diameter and has a 5000kg load capacity.
A 285 mm diameter opening in the turntable's center allows the insertion of a power supply for testing.
The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU 3.0 or NCD Controller.
Other diameters and load capabilities are available on request.
The turntable TT 6.0-10t is especially designed for flush mounted installation in semi anechoic electromagnetic absorption chambers. The carrier plate is made of stainless steel. It is 6.0m in diameter and has a 10000kg load capacity.
A 285 mm diameter opening in the turntable's center allows the insertion of a power supply for testing.
The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU 3.0 or NCD Controller.
Other diameters and load capabilities are available on request.
The turntable TT 8.0-10t is especially designed for flush mounted installation in semi anechoic electromagnetic absorption chambers. The carrier plate is made of stainless steel. It is 8.0m in diameter and has a 10000kg load capacity.
A 285 mm diameter opening in the turntable's center allows the insertion of a power supply for testing.
The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU 3.0 or NCD Controller.
Other diameters and load capabilities are available on request.
SG 4.5 – 10 kg – 0.01 Spherical Gantry with TT 6.0 – 5 t – 0.01 Turntable
The Multiple Control Device NCD is suited for the operation of optionally up to 8 devices with multiple axis of motion. Those devices can be any combinations of antenna masts, turntables, cable guide rails or any other positioning equipment.
This controller NCD permits the operation in manual, semi-automatic and remote-control mode via IEEE 488.2 (GPIB bus), or optionally other interfaces, of multiple devices simultaneously.
The controller FCU3.0 is suited for the operation of up to four devices with multiple axis of motion. Those devices can be any combinations of antenna masts, turntables, cable guide rails or any other positioning equipment. Furthermore, the FCU3.0 permits the operation in manual, semi-automatic and remote control of multiple devices simultaneously via Ethernet.
Other diameters and load capabilities are available on request.
The controller FCU3.0 S is suited for the operation of one(1) devices with multiple axis of motion. Those devices can be any combinations of antenna masts, turntables, cable guide rails or any other positioning equipment. Furthermore, the FCU3.0 S permits the operation in manual, semi-automatic and remote control of one devicey via Ethernet.
Other diameters and load capabilities are available on request.
The controller FCU3.0 S Lite is suited for the operation of one(1) device with one axis of motion. Furthermore, the FCU3.0 S permits the operation in manual, semi-automatic and remote control of one devicey via Ethernet.
Other diameters and load capabilities are available on request.