CG-50LR10100R, 50 kHz - 6GHz, 50/500kHz 10MHz/100MHz Steps, Conducted & Radiated Comb Generator
SG 9303, 0.01 - 8 GHz Comb Generator
SG 9302 D, 0.1 - 18 GHz Comb Generator
SG 9301, 1-1000MHz Comb Generator
IGUF 2910 S, High Power Pulse Generator
TBCG1 Radiating Comb Generator
TBCG2 Comb Generator/Frequency Multiplier
TBCG3-RN2 Comb Generator, 5 kHz-2 GHz, for RE
TBCG3-RN6 Comb Generator, 5 kHz-6 GHz, for RE
TBCG3-CN Comb Generator, 5 kHz-2 GHz, for CE
IGUU 2918, Calibration-Pulse Generator for CISPR 16 Receivers
Products
CG-50L10100R, 50 kHz - 7.5GHz, 50/500kHz 10MHz/100MHz Steps, Conducted & Radiated Comb Generator
- Frequency Range:
- 50kHz - 30MHz for AC / DC LISN
- 10MHz / 100MHz - 7.5GHz for RE
- Frequency step:
- 30/500 kHz switchable for AC / DC LISN
- 10MHz / 100MHz step switchable for RE
- Includes: Generator, Charger, Storage case
CG-50LR10100R, 50 kHz - 6GHz, 50/500kHz 10MHz/100MHz Steps, Conducted & Radiated Comb Generator
- Frequency Range:
- 50kHz - 108MHz for AC / DC LISN
- 50kHz - 30MHz with Monopole Antenna (CISPR 25)
- 30MHz - 1GHz (10MHz steps)
- 1 - 6GHz (100MHz steps)
- Frequency step:
- 50/500 kHz switchable for AC / DC LISN and Monopole Antenna
- 10MHz for 30MHz - 1GHz
- 100MHz step for 1 - 6GHz
- Includes: Generator, Charger, Storage case
SG 9303, 0.01 - 8 GHz Comb Generator
- Spectrum Generator
- 10 MHz - 8 GHz
- spectrum lines 10 & 100 MHz
- N-female connector
- charger ACS 110 required
- main application: reference radiator requires an antenna
SG 9302 D, 0.1 - 18 GHz Comb Generator
- Spectrum Generator
- 100 MHz - 18 GHz
- spectrum lines 100 MHz (minor adjustment allowed to match up to receiver)
- SMA-female connector
- charger Via USB
- main application: reference radiator requires antenna
SG 9301, 1-1000MHz Comb Generator
- Spectrum Generator
- 30-1000 MHz
- spectrum lines switchable 100 Hz, 1 kHz, 10 kHz, 100 kHz, and 1 MHz
- N-female connector
- charger ACS 110 required
- main application: reference radiator (antenna required e.g. UBAA 9114 with BBVU 9135)
IGUF 2910 S, High Power Pulse Generator
- Small battery-operated generator
- Works with all appropriate antennas via 50 - Ohms - Output
- Standard field generation without problems caused by cables
- Easy receiver tuning due to broadband-spectrum
- High pulse repetition frequency gives audible sound
- Extremely high pulse power: 1.8 kilowatts at 50 Ohms
- Exceptionally flat spectrum: 300 MHz / - 1 dB, 1 GHz / -6 dB
TBCG1 Radiating Comb Generator
The TBCG1 is a radiating comb generator with an internal antenna and a base frequency of 100MHz. It radiates a comb spectrum characterized up to 6GHz. The comb generator is built and characterized to serve as a rough reference for testing radiated noise measurement set ups in anechoic chambers, TEM/GTEM cells, shielded chambers, etc.
TBCG2 Comb Generator/Frequency Multiplier
The TBCG2 is a passive, step recovery diode based comb generator/frequency multiplier. It is optimized for moderate drive power and spectrum flatness in the frequency range 1 MHz to 2.5GHz. The recommended drive power is +10 dBm to +20 dBm The frequency range for the drive signal is 1 MHz to 350MHz
TBCG3-RN2 Comb Generator, 5 kHz-2 GHz, for RE
The TBCG3-RN2 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.
- 5 kHz-2 GHz,
- switchable 5, 10, 25, 50, 100 MHz,
- external: 5 kHz-200 MHz,
- 6xNiMH, AA, Charger,
- 2 monopole antennas
TBCG3-RN6 Comb Generator, 5 kHz-6 GHz, for RE
The TBCG3-RN6 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.
- 5 kHz-6 GHz,
- switchable 5, 10, 25, 50, 100 MHz,
- external: 5 kHz-200 MHz,
- 6xNiMH, AA, Charger,
- 2 monopole antennas
TBCG3-CN Comb Generator, 5 kHz-2 GHz, for CE
The TBCG3-CN comb generator is primarily designed to verify conducted emission test setups. It is a useful tool to validate the correct operation of the LISN, correct set-up, and correct configuration of the spectrum analyzer.
- 5 kHz-2 GHz,
- switchable 0.1, 0.5, 1, 5, 10 MHz,
- external: 5 kHz-300 MHz,
- 4xNiMH, AA, Charger,
- Country-specific adapter cables DUT socket of the LISN
IGUU 2918, Calibration-Pulse Generator for CISPR 16 Receivers
- Calibration-Pulse Generator acc. CISPR 16
- For Band A, B, C, D (9 kHz-1000 MHz)
- To calibrate the pulse response of the EMI receiver
- Pulse repetition frequency main generator 0.1 - 200 Hz (aux. generator up to 1 MHz) with IEEE-488 Interface.
