Products
SPLIT 100, 2 way splitter, 100 Ohms acc. EN 50561-1
- A resistive, unsymmetrical two-way splitter
- The impedance of 100 Ω
- Acc. to EN 50561-1:2012 which is explained in chapter 9.2.
- Figure 4 shows the measurement setup with the available components
SYMAT 40, Symmetrical Step Attenuator, 100 Ohms acc. EN 50561-1
- Symmetrical 100 Ω step attenuator
- Switchable between 0 dB, 10 dB, 20 dB, 30 dB, 40 dB and 50 dB
- For measurement of PLC or PLT to discover dynamic performance
- Acc. EN 50561-1:2012 chapter 9.2. Figure 4 shows the setup
SY 9223-50561-1, Symmetrical Transformer, 50 to 100 Ohms acc. EN 50561-1
- Symmetrical transformer
- Transforms an unsymmetrical 50 Ω signal into a symmetrical signal with an impedance of 100 Ω
- Attenuates the power by 8 dB
- Acc. to EN 50561-1:2012, chapter 9.2. Figure 4 shows the setup, figure 5 shows the principle diagram
CU 50561-1, Coupling Unit , acc. EN 50561-1
- The coupling unit for measurements at powerline transmission devices.
- Acc. standard EN-50561-1
- Combined with two-line impedance stabilization networks (LISN)
AC Separator, acc. EN 50561-1
- The AC separators provide connectivity between the LISNs and the device under test (DuT) respectively the auxiliary equipment (AE) as well as the connection to the measurement setup.
- Two of the R/C elements required by the standard EN 50561-1
- Built-in (1 M || 100 nF).
- Two identical AC separators are required
SY 9223-PLC-AAN, PLC bypass
PLC bypass according to CISPR 25, Annex E.4.3, Figure E.7. Can be used in AC and DC systems.
