CDN BCI-P1 Bulk Current Injection Probe 1 MHz – 400 MHz
CDN BCI-P1_MT-1 Bulk Current Injection Probe 4 kHz – 400 MHz
CDG CMP-45 Current Monitoring Probe, Foldable, with Calibration Set
EMCVIEW PC SOFTWARE PRE-COMPLIANCE TESTING
TBOH02 - Self Powered Active Load
TBSB-105/60 Shielded Bags
TBGP - Roll Up Ground Plane
TB Coax Cable Assemblies
TBCH - Cable Holders
LSAOL 1.0, Laser Powered RF Link, 9kHz - 6GHz w/5-12VDC 2W power sourse
LSAOL 1.1, Laser Powered RF Link, 9kHz - 6GHz
Products
CalStan 11.0 - RF Measurement Software
CalStan 11 is a software tool for automation of radio frequency (RF) calibrations and measurements of EMC test sites and test equipment. The software controls the instruments via GPIB bus and LAN, reads the measurement values and computes the results. A modular concept with measurement plug-ins allows customization according to the test lab requirements.
CDN BCI-P1 Bulk Current Injection Probe 1 MHz – 400 MHz
BCI-P1 Bulk Current Injection Probe 10 kHz – 400 MHz - Meets specifications of ISO 11452-4:2005 and IEC 61000-4-6 - Frequency range from 1 MHz up to 400 MHz - Designed for automotive BCI testing - Low insertion loss (1MHz - 400MHz) to test bellow 1MHz (IEC/DO/MIL) see CDN BCI-P1_MT-1
CDN BCI-P1_MT-1 Bulk Current Injection Probe 4 kHz – 400 MHz
CDN BCI-P1_MT-1 Bulk Current Injection Probe 4 kHz – 400 MHz - Meets specifications of ISO 11452-4:2005, MIL-STD-461, DO-160 and IEC 61000-4-6 - Frequency range from 4 kHz up to 400 MHz - Designed for BCI testing
CDG CMP-45 Current Monitoring Probe, Foldable, with Calibration Set
CDG CMP-45 Current monitoring probe • Cable diameters up to 45 mm • Frequency range 10 kHz to 400 MHz • Foldable, easy positioning on the conductor / cable • For BCI testing acc. to ISO 11452-4 and others • Insertion impedance < 2,5 ?
EMCVIEW PC SOFTWARE PRE-COMPLIANCE TESTING
The Tekbox EMC compliance software EMCview for PCs is a user friendly EMC pre-compliance testing of radiated and conducted emissions. It is a perfect complement for automated testing using our LISNs and TEM Cells. A built in amplitude correction enables correction and conversion coefficients for cables, amplifiers, attenuators, LISNs, TEM cells, antennas, RF current probes, striplines and capacitive coupling clamps.
TBOH02 - Self Powered Active Load
The TBOH02 is a self-powered, precision active load. It does not need a separate supply voltage and operates as low as 2V. Its features include constant resistance and constant current mode. A 10 turn potentiometer with dial, a range switch and a precision reference enable the accurate setting of current or resistance. Furthermore, it can be controlled by an external voltage.
TBSB-105/60 Shielded Bags
The TBSB line of shielded bags is designed to suppress interference from ambient noise when carrying out EMC pre-compliance measurements. The shielded bags are a low cost alternative to shielded tents for test equipment such as LISNs or TEM-cells. The shielded bags are composed of two layers of conductive fabrics. The access opening is sealed with conductive Velcro tape. Suggestions on how to feed cables into the bags are given in the application section of this manual.
TBGP - Roll Up Ground Plane
Many EMC pre-compliance test setups require a ground plane. Not every lab has the necessary space for the permanent installation of a sheet metal ground plane.
TB Coax Cable Assemblies
Compleat your pre-compliance setup with premade coax cables.
TBCH - Cable Holders
The TBCH1 and TBCH2 wall mount cable holders are efficient and neat solutions to store laboratory cables. The TBCH1 cable holder is designed with a focus on storing RF cables and oscilloscope probes. The TBCH2 is ideal for banana cables.
LSAOL 1.0, Laser Powered RF Link, 9kHz - 6GHz w/5-12VDC 2W power sourse
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.
- They are ideally suited for EMC emission testing.
- The need for batteries is eliminated through laser-powered operation.
- The LSAOL Front Unit is laser-powered and equipped with both low and high-band pre-amplifiers
- LSAOL 1.0 provides an adjustable, 5 V to 12 V phantom power supply delivering up to 2W to external devices such as active antennas or pre-amplifiers.
LSAOL 1.1, Laser Powered RF Link, 9kHz - 6GHz
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.
- They are ideally suited for EMC emission testing.
- The need for batteries is eliminated through laser-powered operation.
- The LSAOL Front Unit is laser-powered and equipped with both low and high-band pre-amplifiers
- LSAOL 1.0 provides an adjustable, 5 V to 12 V phantom power supply delivering up to 2W to external devices such as active antennas or pre-amplifiers.
