AM 4.0-O Antenna Mast, OATS, 4m
AM 4.0 Antenna Mast, 4m
CAM 6.0-P 12kg Compact Antenna Mast, 6m
TT 1.2 WI, Turn Table, 1.2m Diameter, 500kg
NCD 3.0 Positioner Controller, 8 devices
FCU 3.0 Positioner Controller, 4 devices
FCU 3.0 S, Positioner Controller, 1 devices
FCU 3.0 S-LITE, Positioner Controller, 1 devices
Products
TT 1.5 WI, Turn Table, 1.5m Diameter, 500kg
The turntable TT 1.5 WI is especially for installation in fully anechoic electromagnetic absorption chambers. The carrier plate is made of waterproof, laminated and lacquered wood. There is a division plate between the wooden plates, which can be covered with ferrite tiles in order that there are no metal parts above the ground plane.
Other diameters and load capabilities are available on request.
AM 4.0-O Antenna Mast, OATS, 4m
The Antenna Mast AM 4.0-0
- Height range 1.0 - 4.0 m
- Designed for easy use outside on OATS
- Electric polarization change 90°
- Electric stepper motor height
- Antenna Load: 10 kg (when balanced)
AM 4.0 Antenna Mast, 4m
The Antenna Mast AM 4.0
- Height range 1.0 - 4.0 m
- Electric polarization change 90°
- Electric stepper motor height
- Antenna Load: 10 kg (when balanced)
CAM 6.0-P 12kg Compact Antenna Mast, 6m
The Compact Antenna Mast CAM 6.0-P 12kg
- Height range 1.0 - 6.0 m
- Pneumatic polarization change 90°
- Electric stepper motor height
- Antenna Load: 12 kg (when balanced)
TT 1.2 WI, Turn Table, 1.2m Diameter, 500kg
The turntable TT 1.2 WI is especially for installation in fully anechoic electromagnetic absorption chambers. The carrier plate is made of waterproof, laminated and lacquered wood. There is a division plate between the wooden plates, which can be covered with ferrite tiles in order that there are no metal parts above the ground plane.
Other diameters and load capabilities are available on request.
NCD 3.0 Positioner Controller, 8 devices
The Multiple Control Device NCD is suited for the operation of optionally up to 8 devices with multiple axis of motion. Those devices can be any combinations of antenna masts, turntables, cable guide rails or any other positioning equipment.
This controller NCD permits the operation in manual, semi-automatic and remote-control mode via IEEE 488.2 (GPIB bus), or optionally other interfaces, of multiple devices simultaneously.
FCU 3.0 Positioner Controller, 4 devices
The controller FCU3.0 is suited for the operation of up to four devices with multiple axis of motion. Those devices can be any combinations of antenna masts, turntables, cable guide rails or any other positioning equipment. Furthermore, the FCU3.0 permits the operation in manual, semi-automatic and remote control of multiple devices simultaneously via Ethernet.
Other diameters and load capabilities are available on request.
FCU 3.0 S, Positioner Controller, 1 devices
The controller FCU3.0 S is suited for the operation of one(1) devices with multiple axis of motion. Those devices can be any combinations of antenna masts, turntables, cable guide rails or any other positioning equipment. Furthermore, the FCU3.0 S permits the operation in manual, semi-automatic and remote control of one devicey via Ethernet.
Other diameters and load capabilities are available on request.
FCU 3.0 S-LITE, Positioner Controller, 1 devices
The controller FCU3.0 S Lite is suited for the operation of one(1) device with one axis of motion. Furthermore, the FCU3.0 S permits the operation in manual, semi-automatic and remote control of one devicey via Ethernet.
Other diameters and load capabilities are available on request.
