Trans-Sense Quick pre-check of IEC 61000-4-4 EFT
VDips-Sense Quick pre-check of IEC 61000-4-11 Dips
CAB1001 Inrush Compensator IEC 61000-4-11 Dips
SESD 30 T 1000 Support arm
ESD-Sense Quick pre-check of IEC 61000-4-2 ElectroStatic Discharge
ESD-Soft 6: Control software for ESD
HILO Remote, For HILO/TEST Gernerators
CAR Cal Kit, Standard loads for Automotive Testing
CCK, Capacitor Calibration Kit for: PG10-200, PG12-360 and PG20-100
Software Prog. CAR-Arbitrary WG Remote, for HILO/TEST CAR-SYSTEM
Products
Surge-Sense Quick pre-check of IEC 61000-4-5 Surge
The Surge Sense has been developed with EMC test laboratories in mind to enable a “go / no-go” verification of the surge generator output prior to test.
Trans-Sense Quick pre-check of IEC 61000-4-4 EFT
The Trans Sense has been developed with EMC test laboratories in mind to enable a “go/no-go” verification of the transient generator output prior to the test.
VDips-Sense Quick pre-check of IEC 61000-4-11 Dips
The VDips-Sense has been developed with EMC test laboratories in mind to enable a “go / no-go” verification of the Voltage Dip generator output prior to test.
CAB1001 Inrush Compensator IEC 61000-4-11 Dips
The Conformity Assessment Business Model CAB1001 Surge Inrush Compensator enables users to meet the 500A inrush requirement of EN 61000-4-11 irrespective of supply impedance.
SESD 30 T 1000 Support arm
Support arm with balancer for ESD test station
- Support arm with the carriage
- 360 degrees pivotable
ESD-Sense Quick pre-check of IEC 61000-4-2 ElectroStatic Discharge
The ESD-Sense has been developed with EMC test laboratories in mind to enable a “go / no-go” verification of the ESD generator output prior to test.
ESD-Soft 6: Control software for ESD
The Microsoft-Windows based software controls the ESD generator via a serial interface
HILO Remote, For HILO/TEST Gernerators
Hilo Remote Control is software for personal computers. It is used to control HILO-Test generators from your computer. The software allows users to create tests and reports, which can be changed with your default text editor. In addition, it allows an oscilloscope to monitor all test pulse and to store the captured image of the waveforms on the computer. The communication with the generator is implemented with a LAN connection. The generator is connected via an optical interface. Thus, the PC is completely disconnected from the generator.
CAR Cal Kit, Standard loads for Automotive Testing
In accordance with the pulse verification requirements given in Annex C of ISO 7637-2:2011 and Annex A of ISO 16750-2:2012, test pulses generated by automotive transient generators need to be verified both under no-load (open circuit verification) and loaded conditions with specified loads.
CCK, Capacitor Calibration Kit for: PG10-200, PG12-360 and PG20-100
The Capacitor Calibration Kit CCK has been designed to measure the pulse output voltage of surge generators PG10-200, PG12-360 and PG20-100. IEC 61730-1/2, IEC 60060-2
Software Prog. CAR-Arbitrary WG Remote, for HILO/TEST CAR-SYSTEM
Hilo Remote Control is software for personal computers. It is used to control HILO-Test generators from your computer. The software allows users to create tests and reports, which can be changed with your default text editor. In addition, it allows an oscilloscope to monitor all test pulse and to store the captured image of the waveforms on the computer. The communication with the generator is implemented with a LAN connection. The generator is connected via an optical interface. Thus, the PC is completely disconnected from the generator.
