TBCP3-1000 RF Current Monitoring Probe
TBCG3-CN Comb Generator, 5 kHz-2 GHz, for CE
TBCG3-RN6 Comb Generator, 5 kHz-6 GHz, for RE
TBCDN-M1, CDN, 1-line Power Mains, 15A, 300V AC, 600V DC
TBCP1-200/250/500 RF Current Monitoring Probe
TBCG3-RN2 Comb Generator, 5 kHz-2 GHz, for RE
TBCP2-250/500/750/30k400 Clamp on RF Current Monitoring Probes
TBAS2 SMA Attenuator & Terminatation Set
TBAS1 RF Attenuator Set
TBAS3 10W Type N Attenuator Set
TBCG2 Comb Generator/Frequency Multiplier
Products
TBCP4-250/500/750 Clamp on RF Current Monitoring Probe
The TBCP4-250, -500, and -750 is a fixed aperture RF current monitoring probe, it has a very flat response with a 3dB bandwidth of 750 MHz and is characterized and usable over the frequency range from 10kHz to 800 MHz. The aperture of the RF current monitoring probe is 32 mm. Its transfer impedance is close to 14 dB Ohm in the range from 400 kHz to 750 MHz.
TBCP3-1000 RF Current Monitoring Probe
The TBCP3-1000 is a fixed aperture RF current monitoring probe. It has a very flat response with a 3dB bandwidth of 1 GHz and is characterized and usable over the frequency range from 30kHz to 1 GHz.
The aperture of the RF current monitoring probe is 17 mm. Its transfer impedance is close to 20 dB Ohm in the range from 3 MHz to 1 GHz.
TBCG3-CN Comb Generator, 5 kHz-2 GHz, for CE
The TBCG3-CN comb generator is primarily designed to verify conducted emission test setups. It is a useful tool to validate the correct operation of the LISN, correct set-up, and correct configuration of the spectrum analyzer.
- 5 kHz-2 GHz,
- switchable 0.1, 0.5, 1, 5, 10 MHz,
- external: 5 kHz-300 MHz,
- 4xNiMH, AA, Charger,
- Country-specific adapter cables DUT socket of the LISN
TBCG3-RN6 Comb Generator, 5 kHz-6 GHz, for RE
The TBCG3-RN6 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.
- 5 kHz-6 GHz,
- switchable 5, 10, 25, 50, 100 MHz,
- external: 5 kHz-200 MHz,
- 6xNiMH, AA, Charger,
- 2 monopole antennas
TBCDN-M1, CDN, 1-line Power Mains, 15A, 300V AC, 600V DC
The TBCDN-M1 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M1 is compliant with IEC 61000-4-6 Annex D2.
TBCP1-200/250/500 RF Current Monitoring Probe
The TBCP1-200, TBCP1-250, and TBCP1-500 is fixed aperture RF current monitoring probe, expanding the Tekbox product range of affordable EMC pre-compliance test equipment. The probe has a 3dB bandwidth of approximately 200 MHz and is characterized and usable over the frequency range from 10kHz to 500 MHz. The aperture of the RF current monitoring probe is 25 mm. Its transfer impedance is > 14 dB Ohm in the range from 40 kHz to 200 (500) MHz.
TBCG3-RN2 Comb Generator, 5 kHz-2 GHz, for RE
The TBCG3-RN2 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.
- 5 kHz-2 GHz,
- switchable 5, 10, 25, 50, 100 MHz,
- external: 5 kHz-200 MHz,
- 6xNiMH, AA, Charger,
- 2 monopole antennas
TBCP2-250/500/750/30k400 Clamp on RF Current Monitoring Probes
The TBCP2-250, -500, -750 -30K400 are snap-on RF current monitoring probes with very flat response of a 3dB bandwidth.
TBAS2 SMA Attenuator & Terminatation Set
The TBAS2 RF SMA attenuator/termination set consists of a 3dB, 6dB, 10dB, 15dB, 20dB and 30dB SMA attenuators in a beechwood box. Furthermore, it contains two pieces SMA 50 Ohm terminations.
TBAS1 RF Attenuator Set
The TBAS1 RF 2W attenuator set
TBAS3 10W Type N Attenuator Set
The TBAS3 RF 10W attenuator set consists of a 3dB, 6dB, 10dB and 20dB attenuator in a beech wood box.
TBCG2 Comb Generator/Frequency Multiplier
The TBCG2 is a passive, step recovery diode based comb generator/frequency multiplier. It is optimized for moderate drive power and spectrum flatness in the frequency range 1 MHz to 2.5GHz. The recommended drive power is +10 dBm to +20 dBm The frequency range for the drive signal is 1 MHz to 350MHz
