Products
TBTC0/1/2/3 - Open TEM Cell for EMC Pre-Compliance Testing
Radiated emission tests are typically carried out in anechoic chambers, using antennas to pick up the radiated signals. Due to bandwidth limitations, several antennas are required to cover the complete frequency range. Furthermore, it requires much space and the cost of the equipment for a standard conformant setup is immense.
TBBT01 High Current Bias-Tee
The TBBT01 Bias-Tee is a device for measuring the saturation effects of power inductors and bias voltage effects on capacitors. The majority of available Bias-Tees for power inductor testing operate at low frequencies, rendering them unsuitable for evaluating decoupling/bias inductors of RF power amplifiers or EMC filters.
TBJT01 Wideband Injection Transformer
The TBJT01 is a wideband injection transformer for control loop stability measurements. It provides galvanic isolation between the swept signal source and the control loop. The injection transformer is internally terminated with a 5 Ohm resistor and protected with a 100 mA fuse. The usable frequency range is 10 Hz to 45 MHz.
TBJT02 Wideband Injection Transformer
The TBJT02 is a wideband injection transformer for control loop stability measurements. It provides galvanic isolation between the swept signal source and the control loop. The injection transformer is internally terminated with a 5 Ohm resistor and protected with a 100 mA fuse. The usable frequency range is 1 Hz to 7 MHz.
TBGTC1 Open GTEM Cell for EMC Pre-Compliance Testing
The TBGTC1 open GTEM-cell is a low-cost cell for EMC pre-compliance immunity and emissions testing. Unlike TEM cells, which have limits at higher frequencies, the TBGTC1 GTEM cell may operate up to 6GHz.
