Transient Generator

• MIL-STD-188-125-2 Compliant – Designed for pulse current injection (PCI) testing of antenna POE protective devices.
• Adjustable High-Voltage Pulses –  0.05 - 5 kV, 50Amps (CLP5K) for precise testing.
• Broad Frequency Coverage – Supports testing from 30 MHz up to 477.5 MHz with variable charge line plugs.
• Ultra-Fast Pulse Rise Time – and for high-speed transient testing.
• Direct Coaxial Coupling – No external coupling device required for efficient pulse injection.
• Automated Operation & Remote Control – RS232 & USB interfaces for seamless integration and monitoring.
• Complete Test Solution – Includes charge line plugs, current probes, fiber optic links, and optional Montena PULSELab software.

ESD Pulse Generator 10 kV – PESD-ECSS-12K

• High-Voltage Range: 20 V to 10 kV, positive polarity only.
• ECSS Compliant: Meets ECSS-E-ST-20-07C Rev.2 for space-grade ESD tests.
• Damped Oscillatory Waveform: Ensures accurate wire-coupled discharge simulations.
• Remote Control & Monitoring: Offers single shot, repetitive, or remote triggering with RS-232/USB.
• Safety & Reliability: Conforms to EN61010-1 and integrates a 24 Vdc safety loop

ESD Pulse Generator 10 kV – PESD-ECSS-12K

• High-Voltage Range: 20 V to 10 kV, positive polarity only.
• ECSS Compliant: Meets ECSS-E-ST-20-07C Rev.2 for space-grade ESD tests.
• Damped Oscillatory Waveform: Ensures accurate wire-coupled discharge simulations.
• Remote Control & Monitoring: Offers single shot, repetitive, or remote triggering with RS-232/USB.
• Safety & Reliability: Conforms to EN61010-1 and integrates a 24 Vdc safety loop

PPG-E1-1200 Portable Pulse Generator – Key Highlights

• MIL-STD-188-125 Compliant – Designed for HEMP Pulse Current Injection (PCI) testing.
• High-Current Pulse Generation – Delivers 50 A to 1.2 kA short-circuit current.
• Battery-Powered for Field Testing – Operates >24 hours without external power.
• Fast & Efficient Testing – Pulse rise time ≤ 20 ns, pulse duration 500-550 ns.
• USB Fiber Optic Control – Remote operation with full galvanic isolation for safety.
• Complete Test System Available – Includes couplers, current probes, decoupling networks.
• Rugged Transport Case – Portable & easy to deploy for on-site testing.
• Industry-Leading Accuracy – Precise data acquisition & error-free pulse measurement.

• DO 160 Section 19 Compliance: Generates chattering relay spike trains meeting RTCA DO 160 §19.3.5 and Boeing D6-16050-4 §7.5.2 requirements.
• Adjustable High Voltage Pulses: Up to 600 V burst amplitude, 0.2–10 µs spike width, 50–1000 µs burst duration.
• Intuitive Touchscreen Interface: 7″ display for real time control of polarity, burst length, and duty cycle.
• Dual Monitor Outputs: Two 1:1 Banana ports (≥100 MHz bandwidth) for precise oscilloscope verification.
• Robust Safety Design: Shrouded banana outputs, reinforced HV wiring, earth ground lug, and IP3X enclosure.
• Compact & Portable: 235 × 180 × 140 mm, 2.3 kg—ideal for laboratory or on aircraft test environments

IEC / EN 61000-4-2 The test generator SESD 230 simulates electrostatic discharge as defined in the standard IEC / EN 61000-4-2. Depend on the Equipment Under Test (EUT) and the test set-up for laboratory tests the IEC standard shows two test methods; Test voltage max. 30,0 kV AIR und CON; Discharge impedance 150pF/330 Ohm (IEC); Battery or mains operation; Predefined tests, standard and other

IEC / EN 61000-4-2 The test generator SESD 216 simulates electrostatic discharge as defined in the standard IEC / EN 61000-4-2. Depend on the Equipment Under Test (EUT) and the test set-up for laboratory tests the IEC standard shows two test methods; Air discharge (AIR) and Contact discharge (CON); Test voltage max. 16,5 kV AIR, max. 10,0 kV CON; Discharge impedance 150pF/330 Ohm (IEC); Battery or mains operation; Predefined tests - standard and other

The ESD simulator SESD 30000 is suitable for EMC testing of systems and equipment in accordance with standard IEC / EN 61000-4-2, ISO 10605 (Automotive), MIL-STD and other. The modular structure of the simulator allows further testing according to different standards and customer definitions. Test voltage max. 30,0 kV AIR and CON; Discharge impedance IEC, ISO, MIL etc.; Modular structure, self-test; Automatic charge absorber integrated;

The Microsoft-Windows based software controls the ESD generator via a serial interface

• Protocol reports
• Generation of waveforms with synchronous data acquisition 
• Modular Expandable
• Individual Waveform Generation
• Standard Libraries included
• Unlimited Waveform size
• 2 different Waveforms synchronously 
• DLL's for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
• Simulation of imported oscilloscope waveform