NEMP360 - Mobile RS105 Test System >50kV/m, 360 cm Height
Floor Ground Plane & Vertical Wall
NEMP500 - Mobile RS105 Test System >50kV/m, 500 cm Height
PG1275E - MIL-STD-1275E Surge/Spike Test Generator
NEMP730 - Mobile RS105 Test System >50kV/m, 7.3 m Height
IPG 612T: 6kV RING-WAVE GENERATOR
CAR AWG 6000, 4-quad, 200A Battery Simulator
IPG 2553: Oscillatory Wave Generator
CAR PG 2804 Load Dump Generator
HTS 20-10, 20 kV, DC dielectric strength
IPG 2554: Oscillatory Wave Generator
Products
NEMP110-G - GTEM RS105 Test System >50kV/m
NEMP110-G- RS105 GTEMTest System
- MIL-STD-461 RS105 Compliance: Fully meets NEMP immunity testing standards.
- High Voltage Performance: Generates up to 50 kV/m fields with nanosecond rise times.
- Adaptable GTEM Design: Supports retrofitting of existing GTEM cells for NEMP testing.
- Automated Testing: Streamlined control, data collection, and report generation.
- No Environmental Disturbance: Safe operation without affecting nearby systems.
- Flexible Testing Capability: Accommodates small to medium-sized devices with a 110 cm septum height.
NEMP360 - Mobile RS105 Test System >50kV/m, 360 cm Height
NEMP360 Radiated Susceptibility Test System
- Compliance: Meets MIL-STD-461 RS105 standards for NEMP testing.
- High Precision: Generates a minimum electric field of 50 kV/m, with higher fields available for smaller devices.
- Portable Design: Easy-to-move frame and compact setup for versatile placement.
- User-Friendly: Controlled via computer with RS232 and USB interfaces.
- Versatile Testing: Ideal for assessing EUTs up to appox. 4m x 2m x 1m.
- Robust Specifications: Quick rise time of 2.3 ns and pulse length of 23 ns, ensuring accurate and reliable results.
Floor Ground Plane & Vertical Wall
- Low-profile 12'×10' floor plane with matching vertical wall (up to 12'×10') in galvanized steel.
- Staggered two-layer floor design: wide metal-to-metal overlap, ultra-low impedance, almost zero step height.
- Fast install (1–2 days) with full bonding/continuity verification to the building ground or a shielded room.
- Engineered to meet IEC 61000, CISPR, and MIL-STD-461 ground-plane requirements.
- Custom sizes/materials (steel, aluminum, copper), edge ramps, LISN pads, and cable trenches available.
- Delivers repeatable EMC/ESD results by minimizing loop impedance and stray coupling paths.
NEMP500 - Mobile RS105 Test System >50kV/m, 500 cm Height
NEMP500 Radiated Susceptibility Test System
- Compliance: Meets MIL-STD-461 RS105 standards for NEMP testing.
- High Precision: Generates a minimum electric field of 50 kV/m, with higher fields available for smaller devices.
- Portable Design: Easy-to-move frame and compact setup for versatile placement.
- User-Friendly: Controlled via computer with RS232 and USB interfaces.
- Versatile Testing: Ideal for assessing EUTs up to appox. 5.5m x 3m x 1.5m.
- Robust Specifications: Quick rise time of 2.3 ns and pulse length of 23 ns, ensuring accurate and reliable results.
PG1275E - MIL-STD-1275E Surge/Spike Test Generator
Benefits of the PG1275E Pulse Generator
- MIL-STD-1275E Compliant: Dedicated design for conducted susceptibility testing on 28VDC circuits.
- Spike & Surge Testing: Handles spikes up to 260V / 2J and surges up to 200V / 470J.
- High Current Capability: 16A continuous or up to 400A with the optional DM400 decoupling diode module.
- Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
- User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.
Enhance your EMC testing with the PG1275E Pulse Generator—precision, compliance, and versatility combined.
NEMP730 - Mobile RS105 Test System >50kV/m, 7.3 m Height
NEMP730- RS105 Test System
- Compliance: Meets MIL-STD-461 RS105 standards for NEMP testing.
- High Precision: Generates a minimum electric field of 50 kV/m, with higher fields available for smaller devices.
- Portable Design: Easy to move frame and compact design for versatile placement options
- User-Friendly: Controlled via computer with RS232 and USB interfaces.
- Versatile Testing: Ideal for assessing small electronics like printed circuit boards and subsystems.
- Robust Specifications: Quick rise time of 2.3 ns and pulse length of 23 ns, ensuring accurate and reliable results.
IPG 612T: 6kV RING-WAVE GENERATOR
IPG 612T RING-WAVE GENERATOR is a High-voltage pulse generator producing Ring Wave 0.5 µs / 100 kHz acc. to IEC 61000-4-12. The output peak voltage can be preset continuously from 0.2 - 6 kV. Rise time 0.5µs to the first peak, ringing frequency 100 kHz. The picture is shown with PA 503 Option.
CAR AWG 6000, 4-quad, 200A Battery Simulator
The CAR arbitrary waveform generator 6000 is a compact EMC testing system for performing voltage variations on supply lines of vehicles. The system strictly complies with the international standards and manufacturer standards that describe phenomena on the power supply of vehicles. Thus, the CAR arbitrary waveform generator 6000 is the optimal voltage power source for battery simulation up to 70V. It can simulate pulse 2b, pulse 4, starting profile, superimposed alternating voltage, and others, up to a battery current of 100A.
IPG 2553: Oscillatory Wave Generator
The oscillatory wave generator IPG 2553 has been designed for immunity testing of electrical and electronic equipment against repetitive damped oscillatory magnetic field according to IEC 61000-4-10 requirements. It generates a decaying cosine current waveform with ringing frequency of 100 kHz or 1.0 MHz. The generator output is connected to special designed Helmholtz-coil which generates magnetic field with 10 - 100 A/m.
CAR PG 2804 Load Dump Generator
Compact EMC test unit designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients. PG 2804 includes the generation of pulses #5 / Test A and Test B. It is designed to be connected to the power supply interface of the CAR-TESTER. Load Dump Generator EMC-Test Equipment for the electrical installation of vehicles.
- Puls #5 / Test A / Test B
- Ri = 0.5 / 1 / 2 / 4 / 8 Ω
- Used with CAR-SYS 14 or independently with Coupling Network.
HTS 20-10, 20 kV, DC dielectric strength
High-Voltage DC Test Sets HTS 20-10 are designed for testing dc dielectric strength of components, insulations, air- and surface flash-over gaps. Also for testing SPDs according to IEC 61643-1. The test voltage can be adjusted from 0.2 kV up to 20 kV. The test voltage rises like a ramp from zero to the selected test voltage. The rate of rise can be adjusted from 100 V/sec up to 10000 V/sec. Then the test voltage remains at the selected value for the test time, which can be adjusted from 1 – 1000 sec. Figure: incl. option PA503
IPG 2554: Oscillatory Wave Generator
The oscillatory wave generator IPG 2554 has been designed for immunity testing of electrical and electronic equipment against repetitive damped oscillatory waves according to IEC 61000-4-18 requirements. It generates a decaying sine waveform with ringing frequency from 100 kHz to 30.0 MHz. These waveforms represent disturbances occurring in power, control and signal cables installed in high voltage and medium voltage stations and in heavy industrial installations.
