RF Test Accessories

The TBBCI1-200K280 is a snap-on Bulk Current Injection probe with a frequency range 10 kHz – 300 MHz, for testing according according to the IEC / EN 61000-4-6 standard.

The TBAS1 RF 2W attenuator set

The TBAS2 RF SMA attenuator/termination set consists of a 3dB, 6dB, 10dB, 15dB, 20dB and 30dB SMA attenuators in a beechwood box. Furthermore, it contains two pieces SMA 50 Ohm terminations.

The TBCCP1-400K600 is a coaxial RF current monitoring probe with a 3 dB bandwidth from 400 kHz to 600 MHz and a very flat response from 1 MHz to 200 MHz. 

CDN ABCL-20 Decoupling Clamp for immunity according to IEC / EN 61000-4-6 Ed. 4.0 100 kHz – 1000 MHz Features: For additional decoupling at immunity testing according to IEC / EN 61000-4-6 Suitable for cables up to 20mm diameter

CDN ABCL-35 Decoupling Clamp for immunity according to IEC / EN 61000-4-6 Ed. 4.0 100 kHz – 1000 MHz Features: For additional decoupling at immunity testing according to IEC / EN 61000-4-6 Suitable for cables up to 20mm diameter

OM1 Duplex FSMA FSMA Indoor Duplex Fiber Patch Cable, Corning 62.5/125 Multimode fiber jumpers.  Each end pre-terminated with 2 stainless steel FSMA connectors.  OM1 duplex jumpers have 62.5um Corning optical core and 125um cladding for high speed, low loss, data transmission.  OFNR rated, orange colored, 3.0mm diameter, PVC jacket with zip-cord.

OM1 ST ST Indoor/Outdoor Duplex Fiber Patch Cable, Corning 62.5/125 Multimode fiber jumpers. OFNR Riser Rated fiber cord, tightly buffered in a black, indoor/outdoor protective jacket.  Flexible, easy to install and reliable multi-mode fiber patch cord terminated with duplex ST fiber connectors on both ends. Each fiber breakout has 18" of 3.0mm furcation tubing for added durability.

Upgrade your fiber infrastructure with Absolute EMC’s OM3 LC-LC Armored Duplex Patch Cable—designed for high-speed 10G data transmission and built to withstand rugged environments. Perfect for EMC labs, defense applications, and industrial networks where durability and performance are critical.

• Works with EMSCOPE Products

The TBCG3-CN comb generator is primarily designed to verify conducted emission test setups. It is a useful tool to validate the correct operation of the LISN, correct set-up, and correct configuration of the spectrum analyzer.

• 5 kHz-2 GHz,
• switchable 0.1, 0.5, 1, 5, 10 MHz,
• external: 5 kHz-300 MHz,
• 4xNiMH, AA, Charger,
• Country-specific adapter cables DUT socket of the LISN

EM Clamp for immunity tests IEC / EN 61000-4-6 Ed. 4.0 • EM Clamp for immunity testing of cables with up to 20 (35) mm diameter • High coupling factor: less than 15 watts amplifier output power is required to obtain a test level of 10 V • Calibration unit and calibration data are supplied with each unit.

The TBCG3-RN2 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.

• 5 kHz-2 GHz,
• switchable 5, 10, 25, 50, 100 MHz,
• external: 5 kHz-200 MHz,
• 6xNiMH, AA, Charger,
• 2 monopole antennas