RF Test Accessories

The TBPCP2-3070 is a RF pulse current monitoring probe with a very flat response from 30 Hz to 70 MHz and is characterized over the frequency range from 1 Hz to 200 MHz. 

The TBAS1 RF 2W attenuator set

The TBAS2 RF SMA attenuator/termination set consists of a 3dB, 6dB, 10dB, 15dB, 20dB and 30dB SMA attenuators in a beechwood box. Furthermore, it contains two pieces SMA 50 Ohm terminations.

The TBSCP1-5M300 is a RF surface current monitoring probe with a very flat response from 5 MHz to 300 MHz and is characterized over the frequency range from 30 kHz to 400 MHz.

The TBSCP1-10M500 is a RF surface current monitoring probe that has a very flat response from 10MHz to 500 MHz and is characterized over the frequency range from 30 kHz to 600 MHz. 

The TBATTs are DC - 3GHz attenuators available with 3 - 30dB attenuation in 10-100W versions.  N male to N female connections.

OM1 Duplex FSMA FSMA Indoor Duplex Fiber Patch Cable, Corning 62.5/125 Multimode fiber jumpers.  Each end pre-terminated with 2 stainless steel FSMA connectors.  OM1 duplex jumpers have 62.5um Corning optical core and 125um cladding for high speed, low loss, data transmission.  OFNR rated, orange colored, 3.0mm diameter, PVC jacket with zip-cord.

OM1 ST ST Indoor/Outdoor Duplex Fiber Patch Cable, Corning 62.5/125 Multimode fiber jumpers. OFNR Riser Rated fiber cord, tightly buffered in a black, indoor/outdoor protective jacket.  Flexible, easy to install and reliable multi-mode fiber patch cord terminated with duplex ST fiber connectors on both ends. Each fiber breakout has 18" of 3.0mm furcation tubing for added durability.

Upgrade your fiber infrastructure with Absolute EMC’s OM3 LC-LC Armored Duplex Patch Cable—designed for high-speed 10G data transmission and built to withstand rugged environments. Perfect for EMC labs, defense applications, and industrial networks where durability and performance are critical.

• Works with EMSCOPE Products

The TBCG3-RN2 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.

• 5 kHz-2 GHz,
• switchable 5, 10, 25, 50, 100 MHz,
• external: 5 kHz-200 MHz,
• 6xNiMH, AA, Charger,
• 2 monopole antennas

The TBCG3-RN6 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.

• 5 kHz-6 GHz,
• switchable 5, 10, 25, 50, 100 MHz,
• external: 5 kHz-200 MHz,
• 6xNiMH, AA, Charger,
• 2 monopole antennas

The TBCCP1-400K600 is a coaxial RF current monitoring probe with a 3 dB bandwidth from 400 kHz to 600 MHz and a very flat response from 1 MHz to 200 MHz.