Fiber-optic Links & Cameras

Mini EMI Camera for Low Emission / High Field Use

• For use in very small spaces
• Integrated microphone 
• Battery or wall-powered
• Single Fiber operation (duel direction)
• Options for HIRF, recording, motion triggering, OCR, ...

The infrared camera opto-LWIR was developed specifically for EMC tests. In high field strengths with directional antennas (fire protection!), an overload of the DUT or the absorbers can be detected early.

The dAV receivers have an integrated loudspeaker with adjustable volume, an output for stereo transmission, and HDMI and BNC connectors for Video OUT. The receiver can be ordered in tabletop housing or for 19" rack mounting. An optional SDI output and an ethernet connector are available. Offering a few different configurations depending on the chamber and system size.

Quad view system to integrate and display 4 independent VGA, DVI (HDMI) and CVBS inputs in one screen, including audio.

The recorder serves the purpose of digital recording of a HD audio and video channel. The system can be operated completely via Windows 7 / 8 / 10.uts in one screen, including audio.

LSAOL 1.2 Laser-Powered Analog Optical Link

• Laser-powered RF over fiber — no batteries required
• Wideband coverage from 1 MHz to 3 / 4 / 6 GHz
• Eliminates coaxial cable loss and grounding issues
• Modular RX/TX configuration with optional LNA
• >100 m fiber length for EMC chambers and antenna measurements
• Ethernet control with SCPI for automated test systems

The optoTTL b-12 is used for the optical transmission of 12-volt TTL (Transistor-Transistor Logic) digital signals. Up to 16 bidirectional digital signals with a sampling rate of 40 MS/s (each channel) can be transmitted. The system consists of a transmitter supplied by batteries, a simplex-62,5/125µm-multimode optical cable, and a receiver – which has integrated batteries as well.

The optoRS485 system can be used for the optical transmission of RS485-signals up to a data rate of 1 Mbit/s. It can be used to transmit RS485-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

The optoRS232-HS system can be used for the optical transmission of RS232 signals (hardware handshake) with transmission rates of up to 116 kbit/s. It consists of two identical battery-supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

This power supply can be used with mobile antennas and measuring adapters with several regulated voltages. By default, the BV10D has two output voltages with -10V and +10V, as well as a display for the codings of Rohde & Schwarz-devices. There are two control-LEDs for the monitoring of the voltages at the front side of the device.

This system is used for the power supply of mobile devices with unregulated voltages of -12V and +12V. The BV-12D has two integrated batteries that are directly connected to the outputs.

This system is used for the power supply of mobile devices with an unregulated voltage of 12V. It has integrated batteries wich are directly connected to the output.