optoUSB3.2 Gen1x1, Fiber-optic Link for USB 3.2
U8/12-1M, 8 Channel, 1 MHz, Analog Fiber-optic links
Ux/14-SUBD, 1-16 Channels, 100 kHz, Analog Fiber-optic links
Ux/14-BNC, 1-16 Channels, 100 kHz, Analog Fiber-optic links
optoUSB2.0 -RBDIR, Fiber-optic Link for USB (discontinued)
LSAOL 1.1, Laser Powered RF Link, 9kHz - 6GHz Discontinued
LSAOL 1.0, Laser Powered RF Link, Discontinued
Products
optoRS422, Fiber-optic Link for RS422 signals
The optoRS422 system can be used for the optical transmission of RS422-signals up to a data rate of 1 Mbit/s. It can be used to transmit RS422-signals over long distances or to handle potential ground problems. With the optical transmission and the shielded case, the system is well-equipped for EMI and EME tests.
optoUSB3.2 Gen1x1, Fiber-optic Link for USB 3.2
The optoUSB-3.2 system can be used for the optical transmission of USB signals up to a data rate of 5Gbit/s according to the USB3.2 standard. It can be used to transmit USB signals over long distances (up to 50m) or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
- optoUSB3.2 Comming soon
- optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)
- optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
- optoUSB2.0-VA6K uses a Rosenberger connector which has been proven to be more EMI robust)
U8/12-1M, 8 Channel, 1 MHz, Analog Fiber-optic links
These measuring systems are used for the optical, digital transmission of analog signals:
- 8 Channels
- With a resolution of 10 Bit
- maximal analog bandwidth of 1 MHz.
Ux/14-SUBD, 1-16 Channels, 100 kHz, Analog Fiber-optic links
These measuring systems are used for the optical, digital transmission of analog signals:
- 1-16 Channels
- With a resolution of 10 Bit
- maximal analog bandwidth of 100 kHz.
Ux/14-BNC, 1-16 Channels, 100 kHz, Analog Fiber-optic links
These measuring systems are used for the optical, digital transmission of analog signals:
- 1-16 Channels
- With a resolution of 10 Bit
- maximal analog bandwidth of 100 kHz.
optoUSB2.0 -RBDIR, Fiber-optic Link for USB (discontinued)
The optoUSB-2.0-RBDIR system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0. It can be used to transmit USB-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
- optoUSB2.0-RBDIR uses a Rosenberger connector which has been proven to be more EMI robust)
- See Replacement optoUSB2.0 -VA6K
- optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
- optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)
LSAOL 1.1, Laser Powered RF Link, 9kHz - 6GHz Discontinued
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.
Discontinued
- They are ideally suited for EMC emission testing.
- The need for batteries is eliminated through laser-powered operation.
- The LSAOL Front Unit is laser-powered and equipped with both low and high-band pre-amplifiers
- LSAOL 1.0 provides an adjustable, 5 V to 12 V phantom power supply delivering up to 2W to external devices such as active antennas or pre-amplifiers.
LSAOL 1.0, Laser Powered RF Link, Discontinued
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.
Discontinued
- They are ideally suited for EMC emission testing.
- The need for batteries is eliminated through laser-powered operation.
- The LSAOL Front Unit is laser-powered and equipped with both low and high-band pre-amplifiers
- LSAOL 1.0 provides an adjustable, 5 V to 12 V phantom power supply delivering up to 2W to external devices such as active antennas or pre-amplifiers.
