AB-Precompliant Test Kits
HFa-1-16-Ref, 16 Amp single phase Harmonics and Flicker w/ Impedance Reference
HFa-1S, 16 Amp single phase Harmonics and Flicker
MF EASY, DC-400 kHz, MAGNETIC FIELD EXPOSURE ASSESSMENT SYSTEM
HFa-3-16-Ref, 16 Amp 3-phase Harmonics and Flicker w/Reference Impedance
HFa-3-16, 16 Amp 3-phase Harmonics and Flicker
HFa-3-35-Ref, 35 Amp 3-phase Harmonics and Flicker w/Reference Impedance
HFa-3-75-500-Ref, 75 Amp 3-phase Harmonics and Flicker w/Reference Impedance
TBMR-110M DC - 110 MHz high speed EMI-Analyzer
Products
eNFPKIT, Educational Kit EM Near Field Probe Kit w/Camera & Software
" An RF Probe Kit on Steroids"
- Fully integrated with Y.I.C. Technologies EMViewer software and EMProbe
- Normalization and correction when using the EMViewer software
- Flat response within the range of operation
- Slim Design and Protective Coating
- 18GHz Measured Cable included
- Lectures & Explanation Document
- Designed By Prof. Arturo Mediano, University of Zaragoza, Spain
AB-Precompliant Test Kits
Absolute EMC has designed low-cost pre-compliance systems to meet a wide range of RF emissions and immunity needs. Some form of pre-complaint testing is a must for any company that needs to demonstrate their product for EMC compliance. This enables companies to be responsive when issues happen and to also be proactive before going to the lab to better your chances of passing the first time.
HFa-1-16-Ref, 16 Amp single phase Harmonics and Flicker w/ Impedance Reference
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissons
- USB controlled, Windows 10 compatible software included
- 16 Amp, 120, and 230 Voltages, 50/60Hz
HFa-1S, 16 Amp single phase Harmonics and Flicker
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissons
- USB controlled, Windows 10 compatible software included
- 16 Amp, 120, and 230 Voltages, 50/60Hz
MF EASY, DC-400 kHz, MAGNETIC FIELD EXPOSURE ASSESSMENT SYSTEM
The MF EASY is a scalable and flexible multichannel measurement and assessment system for magnetic fields in the frequency range DC – 400 kHz. It is available with 5 or 10 (on request up to 15) fully isotropic measurement channels enabling simultaneous magnetic field measurements on 5 or 10 (15) measurement positions.
Different standard probe types (sizes and shapes) are available for the MF EASY. Customized probes are available on request. Iso-centrically arranged coil and Hall sensor enable a measurement frequency range from DC to 400 kHz and a measurement sensitivity suitable for assessing human exposure.
HFa-3-16-Ref, 16 Amp 3-phase Harmonics and Flicker w/Reference Impedance
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissions
- USB controlled, Windows 10 compatible software included
- Singel and 3 phase 16 Amp, 120 and 230 Voltages, 50/60Hz
- Includes Refernec impedance
HFa-3-16, 16 Amp 3-phase Harmonics and Flicker
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissions
- USB controlled, Windows 10 compatible software included
- Singel and 3 phase 16 Amp, 120 and 230 Voltages, 50/60Hz
HFa-3-35-Ref, 35 Amp 3-phase Harmonics and Flicker w/Reference Impedance
- Full compliant system meeting the requirements
- IEC 61000-3-2 & IEC 61000-3-12 Harmoinc Emissions
- IEC 61000-3-3 & IEC 61000-3-11 Flicker Emissions
- USB controlled, Windows 10 compatible software included
- Singel and 3 phase 35 Amp, 120 and 230 Voltages, 50/60Hz
- Includes Reference Impedance
HFa-3-75-500-Ref, 75 Amp 3-phase Harmonics and Flicker w/Reference Impedance
- Full compliant system meeting the requirements
- IEC 61000-3-2 & IEC 61000-3-12 Harmoinc Emissions
- IEC 61000-3-3 & IEC 61000-3-11 Flicker Emissions
- USB controlled, Windows 10 compatible software included
- Singel and 3 phase 16 Amp, 120 and 230 Voltages, 50/60Hz
- Includes Refernec impedance
TBMR-110M DC - 110 MHz high speed EMI-Analyzer
The TBMR-110M EMI Analyzer is designed to carry out conducted emission measurements. Its affordability and versatility make it a perfect tool for engineers doing pre-compliance measurements during the development process.
- True DC – 110 MHz measurement range
- CISPR-16, ANSI and MIL-STD compliant detectors
- Peak, Quasi-Peak, Average, CISPR Average, RMS and CISPR RMS dectectors working in parallel
- Zero Span operation with time domain triggering
- Linear, log amplitude and frequency display
