VBA0660 Series — 0.6 to 6 GHz Class-A RF Power Amplifiers
VBA 2700-100D-HE — 700 MHz to 2700 MHz, 100 W Dual Channel RF Power Amplifier
BLS 100-TS, For Low Voltage ISO 7637-2 & 16750-2 Transient testing
ISO 7637-4 HV Test System
ISO 16750-2 Test System
100-TS, VW 80300 / LV 123 / LV 148 : HV Electric vehicle test systems
100-TS, VW 80000 / LV 124 : Battery test systems Test systems for 12 V | 24 V | 48 V batteries
100-TS, 4-Quadrant Current Amplifiers 400 W - 54,000 W
100-TS, 4-Quadrant Voltage Amplifiers 400 W - 54,000 W
FIS 100-200 Fast Interrupt Switch 100V/200Amps
BLS SU 600, Matrix Switching Unit
Products
VBA0860 Series — 0.8 to 6 GHz Class-A RF Power Amplifiers
- Class-A architecture
- GaN Quadrature Hybrid
- Wideband 800 MHz – 6 GHz
- Unconditional stability & extreme VSWR tolerance
- Integrated digital interfaces (select models)
VBA0660 Series — 0.6 to 6 GHz Class-A RF Power Amplifiers
- Class-A architecture
- GaN Quadrature Hybrid
- Wideband 600 MHz – 6 GHz
- Unconditional stability & extreme VSWR tolerance
- Integrated digital interfaces (select models)
VBA 2700-100D-HE — 700 MHz to 2700 MHz, 100 W Dual Channel RF Power Amplifier
- Dual-carrier / two-tone amplification for PIM excitation
- Stable wideband RF drive into PIM fixtures, combiners, and loads
- Lab and production PIM characterization where consistent gain and robust load handling are required
- Dual-carrier / two-tone amplification for PIM excitation
- Stable wideband RF drive into PIM fixtures, combiners, and loads
- Lab and production PIM characterization where consistent gain and robust load handling are required
BLS 100-TS, For Low Voltage ISO 7637-2 & 16750-2 Transient testing
- Protocol reports
- Generation of waveforms with synchronous data acquisition
- Modular Expandable
- Individual Waveform Generation
- Standard Libraries included
- Unlimited Waveform size
- 2 different Waveforms synchronously
- DLL's for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
- Simulation of imported oscilloscope waveform
ISO 7637-4 HV Test System
- Full Compliance – Meets all ISO 7637-4 test requirements
- Pulse A Testing – Simulates MOSFET/IGBT switching noise (100 kHz – 10 MHz)
- Pulse B Testing – Low-frequency sinusoidal disturbances (3 kHz – 300 kHz)
- High-Power RF Amplifier – 75W output (100 kHz – 400 MHz) for clean signal generation
- Burst Generator – Supports configurable burst parameters (1–1000 cycles)
- Power Meter & Directional Coupler – Accurate transient measurement (100 kHz – 10 MHz)
- Integrated Transformer – Isolates high-voltage circuits & prevents transient damage
- Scalable & Modular – Configurable for custom DUT testing needs
- Turnkey Solution – Includes generator, amplifier, coupler, and switching solutions
ISO 16750-2 Test System
- DUT Current Ratings: 40A, 76A, 114A, 152A, 190A, 228A
- Voltage Ripple: Up to 200 kHz (500 kHz)
- Amplifier: BOLAB 100-TS Series 4-quadrant system
- Load Dump Generator: BOLAB 10/63-210 1C
- Switching: FIS 100-xx & FIS SM 96-2 (expandable)
- Power Supply: BOLAB or third-party compatible
- High-Voltage & Insulation Testing: G1-1G-T & 90-4K
- Modular & Scalable: Full ISO 16750-2:2023 compliance
100-TS, VW 80300 / LV 123 / LV 148 : HV Electric vehicle test systems
BOLAB´s new and world´s unique solutions in testing High Voltage profiles for Electric Vehicles are very powerful, flexible, and modular.
Three different solutions for high-speed testing, a medium-range for covering most profiles, and a low budget. Powerful solutions for starting and gaining experience are available.
Modularity is one of the most important characteristics of BOLAB´s systems.
Start with a “small” system of 1 KW (1.000 V, 15 A) and expand module by module as applications require and budgets allow.
It was never this easy to get involved with high voltage tests for Electric Vehicles and to build up these tests to a most powerful solution.
100-TS, VW 80000 / LV 124 : Battery test systems Test systems for 12 V | 24 V | 48 V batteries
- Protocol reports
- Generation of waveforms with synchronous data acquisition
- Modular Expandable
- Individual Waveform Generation
- Standard Libraries included
- Unlimited Waveform size
- 2 different Waveforms synchronously
- DLL's for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
- Simulation of imported oscilloscope waveform
100-TS, 4-Quadrant Current Amplifiers 400 W - 54,000 W
- DC - 200 kHz bandwidth DC
- MHz (small signal -3 dB)
- Output voltage ±75 Vpk
- Rise / fall time 100 V/µs
- USB interface standard, LAN optional
- Analog control input 0 ... ±10 V for control of voltage and current
- Monitor outputs for measured voltage and current values (not all models)
- Modularly extensible via master-slave mode
- Parallel and Series Connections for two or more units
100-TS, 4-Quadrant Voltage Amplifiers 400 W - 54,000 W
- DC - 200 kHz bandwidth DC
- MHz (small signal -3 dB)
- Output voltage ±75 Vpk
- Rise / fall time 100 V/µs
- USB interface standard, LAN optional
- Analog control input 0 ... ±10 V for control of voltage and current
- Monitor outputs for measured voltage and current values (not all models)
- Modularly extensible via master-slave mode
- Parallel and Series Connections for two or more units
FIS 100-200 Fast Interrupt Switch 100V/200Amps
- High current power stage (uni-directional)
- Up to 32 channels for switching low-current signals (bi-directional)
- Switching of resistive, inductive, capacitive passive, and active loads/devices
- Input voltage up to 100V
- Output current up to 200A DC
BLS SU 600, Matrix Switching Unit
- Protocol reports
- Generation of waveforms with synchronous data acquisition
- Modular Expandable
- Individual Waveform Generation
- Standard Libraries included
- Unlimited Waveform size
- 2 different Waveforms synchronously
- DLL's for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
- Simulation of imported oscilloscope waveform
